EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Buoyancy and Surface Roughness on Mechanical Characterization of Shipbuilding Steel by Immersion Instrumented Indentation

Xiaoyuan Zhang iD, Zhongyu Zhao iD, Zhaoxin Wang iD, Shuai Li, Chao Sun, Yan Xia, Zhanqiang Liu iD, Yukui Cai, Bing Wang, Shunbo Wang

Micromachines · 24.06.2026 · 17 (7) · 766

DOI: 10.3390/mi17070766 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 24.06.2026. Verfasst von Xiaoyuan Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shandong University, Jinan 250061, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D Program of Shandong Province, National Science Fund for Young Scholars, Shandong Provincial Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To develop the applications of nanoindentation in a liquid environment, a higher requirement has been presented for evaluating measured errors of micromechanical performance, particularly for the immersion indentation. In this study, a numerical investigation was conducted to explore the influence of buoyancy and surface roughness on the indentation responses of EH36 steel. The results show that a difference in indentation load–depth curves and mechanical properties with and without the buoyancy effect is observed as the indentation depth increases. The relative calculated errors of reduced modulus and indentation hardness are more than 25.35% and 1.92%, respectively. Meanwhile, as the surface roughness increases, a pronounced increase in the data scatter of indentation responses is observed, especially at shallow nanoindentations. The coupling effects of buoyancy and surface roughness on the deviation of indentation data exhibit a competitive relationship rather than a simple cumulative effect. The measured errors of reduced modulus at roughness values below 0.10 μm are predominantly affected by buoyancy during immersion indentations, while the surface roughness is the main factor in other cases. This study provides a comprehensive understanding of these factors and predicts the qualitative variations in micromechanical responses under assumed immersed conditions.

Schlagwörter

Stichwörter der Autor:innen

buoyancy effectfinite element simulationsimmersion instrumented indentationindentation responsessurface roughness

Autor:innen und Institutionen

  • School of Mechanical Engineering, Shandong University, Jinan 250061, China.
  • State Key Laboratory of Advanced Equipment and Technology for Metal Forming, Shandong University, Jinan 250061, China.
  • Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education and National Demonstration Center for Experimental Mechanical Engineering Education at Shandong University, Jinan 250061, China.
  • Shandong North Coastal Machinery Co., Ltd., Zibo 255200, China.
  • Shandong Machinery Design & Research Institute, Jinan 250031, China.
  • School of Airspace Science and Engineering, Shandong University, Weihai 264209, China.

ORCID-Profile: Xiaoyuan Zhang, Zhongyu Zhao, Zhaoxin Wang, Zhanqiang Liu

Förderung

  • Key R&D Program of Shandong Province
  • National Science Fund for Young Scholars
  • Shandong Provincial Natural Science Foundation
  • Opening Project of the Key Laboratory of CNC Equipment Reliability, Ministry of Education, Jilin University
  • Key Laboratory of High-Efficiency and Clean Mechanical Manufacture at Shandong University, Ministry of Education

Zitieren

APA

Zhang, X., Zhao, Z., Wang, Z., Li, S., Sun, C., Xia, Y., Liu, Z., Cai, Y., Wang, B., & Wang, S. (2026). Effects of Buoyancy and Surface Roughness on Mechanical Characterization of Shipbuilding Steel by Immersion Instrumented Indentation. Micromachines, 17(7), 766. https://doi.org/10.3390/mi17070766

Vancouver

Zhang X, Zhao Z, Wang Z, Li S, Sun C, Xia Y, et al. Effects of Buoyancy and Surface Roughness on Mechanical Characterization of Shipbuilding Steel by Immersion Instrumented Indentation. Micromachines. 2026;17(7):766. doi:10.3390/mi17070766

BibTeX
@article{Zhang2026,
  author = {Zhang, Xiaoyuan and Zhao, Zhongyu and Wang, Zhaoxin and Li, Shuai and Sun, Chao and Xia, Yan and Liu, Zhanqiang and Cai, Yukui and Wang, Bing and Wang, Shunbo},
  title = {Effects of Buoyancy and Surface Roughness on Mechanical Characterization of Shipbuilding Steel by Immersion Instrumented Indentation},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {7},
  pages = {766},
  doi = {10.3390/mi17070766}
}
Kostenlos starten →