EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Red Color Conversion via Mixing Green and Red Quantum Dots in a Polydimethylsiloxane-Based Color Conversion Layer

Sang-Uk Byun, Su-Been Lee, Seo-Young Kim, Yu-Lim Seok, Gun Park, Dae-Gyu Moon iD

Micromachines · 23.06.2026 · 17 (7) · 762

DOI: 10.3390/mi17070762 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.06.2026. Verfasst von Sang-Uk Byun und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Materials, Device, and Equipment Engineering, Soonchunhyang University, Asan-si 31538, Chungcheongnam-do, Republic of Korea. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Soonchunhyang University Research Fund, Korea Institute for Advancement of Technology, Korea government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quantum dot (QD) color conversion technology has attracted considerable attention in QD-OLED displays because it enables the generation of highly pure red and green emissions from blue OLED excitation with reduced fabrication complexity. Mixed QD color conversion layers consisting of red and green QDs dispersed in a polydimethylsiloxane matrix were fabricated to improve red color conversion efficiency and suppress blue leakage. The color conversion characteristics of the mixed QD layers were investigated by varying the QD contents and layer thicknesses. The color conversion spectra, blue leakage characteristics, color conversion efficiency, and output/input efficiency were systematically analyzed. Compared with red QD-only layers, the mixed QD layers exhibited more effective suppression of blue leakage and stronger red emission even at relatively small layer thicknesses. The red QD-only layer containing 100 mg of red QDs exhibited a color conversion efficiency of 16.7% at a thickness of 38 µm, whereas the mixed QD layer with the same red QD content achieved a higher color conversion efficiency of 19.3% at a thickness of only 5.6 µm. The enhanced color conversion efficiency of the mixed QD layers is likely associated with increased absorption of blue photons and additional excitation of red QDs through photon reabsorption and possible energy transfer processes between the green and red QDs.

Schlagwörter

Stichwörter der Autor:innen

blue leakagecolor conversion efficiencycolor conversion layermixed QD layerquantum dot

Autor:innen und Institutionen

  • Department of Electronic Materials, Device, and Equipment Engineering, Soonchunhyang University, Asan-si 31538, Chungcheongnam-do, Republic of Korea.

ORCID-Profile: Dae-Gyu Moon

Förderung

  • Soonchunhyang University Research Fund
  • Korea Institute for Advancement of Technology
  • Korea government

Zitieren

APA

Byun, S. U., Lee, S. B., Kim, S. Y., Seok, Y. L., Park, G., & Moon, D. G. (2026). Enhanced Red Color Conversion via Mixing Green and Red Quantum Dots in a Polydimethylsiloxane-Based Color Conversion Layer. Micromachines, 17(7), 762. https://doi.org/10.3390/mi17070762

Vancouver

Byun SU, Lee SB, Kim SY, Seok YL, Park G, Moon DG. Enhanced Red Color Conversion via Mixing Green and Red Quantum Dots in a Polydimethylsiloxane-Based Color Conversion Layer. Micromachines. 2026;17(7):762. doi:10.3390/mi17070762

BibTeX
@article{Byun2026,
  author = {Byun, Sang-Uk and Lee, Su-Been and Kim, Seo-Young and Seok, Yu-Lim and Park, Gun and Moon, Dae-Gyu},
  title = {Enhanced Red Color Conversion via Mixing Green and Red Quantum Dots in a Polydimethylsiloxane-Based Color Conversion Layer},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {7},
  pages = {762},
  doi = {10.3390/mi17070762}
}
Kostenlos starten →