Stability and Dynamics of Milling Process During Cutter–Workpiece Engagement and Disengagement Stages
Micromachines · 18.06.2026 · 17 (6) · 738
DOI: 10.3390/mi17060738 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.06.2026. Verfasst von Jiawei Mei und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
In milling operations, cutters entering and exiting workpiece boundaries cause varying radial immersions and chip thicknesses. This generates aperiodic cutting forces that often induce vibrations and degrade surface quality. To address this, this study aims to accurately predict milling forces and surface profiles during these critical engagement and disengagement phases. An analytical approach was developed to estimate the changing distances between the cutting teeth and workpiece boundaries, enabling the precise calculation of the dynamic chip thickness as the cutter transitions through the material. Based on these dynamic calculations, milling forces and system responses were simulated. Experimental validation demonstrated a strong agreement between the simulated cutting forces, machined surface profiles, and real-world results. Notably, findings revealed that even cutting parameters deemed stable by traditional stability lobes can still trigger vibrations during these boundary transitions. Consequently, a novel parameter selection strategy is proposed to effectively prevent these transient vibrations, significantly enhancing the final surface finish. Ultimately, this comprehensive modelling framework provides a deeper understanding of the system dynamics throughout the entire milling process, offering high relevance for broader applications, such as optimising energy consumption, predicting tool wear, and improving machining parameter optimisation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China.
- School of Aerospace, Faculty of Science & Engineering, University of Nottingham Ningbo China, Ningbo 315100, China.
- Faculty of Computer and Mathematical Sciences, The Hong Kong Polytechnic University, Hong Kong 999077, China.
ORCID-Profile: Luxuan Sun
Förderung
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Mei, J., Wu, C., Jin, Y., Sun, L., Liu, S., Han, Y., & Huang, Y. (2026). Stability and Dynamics of Milling Process During Cutter–Workpiece Engagement and Disengagement Stages. Micromachines, 17(6), 738. https://doi.org/10.3390/mi17060738
Vancouver
Mei J, Wu C, Jin Y, Sun L, Liu S, Han Y, et al. Stability and Dynamics of Milling Process During Cutter–Workpiece Engagement and Disengagement Stages. Micromachines. 2026;17(6):738. doi:10.3390/mi17060738
BibTeX
@article{Mei2026,
author = {Mei, Jiawei and Wu, Chengzhu and Jin, Ye and Sun, Luxuan and Liu, Sunyi and Han, Yaoxuan and Huang, Yuyang},
title = {Stability and Dynamics of Milling Process During Cutter–Workpiece Engagement and Disengagement Stages},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {6},
pages = {738},
doi = {10.3390/mi17060738}
}
EUVIMED