Optimization of Process Parameters for Laser Remelting Nickel Coating
Micromachines · 24.05.2026 · 17 (6) · 646
DOI: 10.3390/mi17060646 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 24.05.2026. Verfasst von Hengzheng Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electronic Engineering, Suzhou University, Suzhou 234000, China. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Provincial Department of Education.
Abstract (Originalsprache)
Nickel coating exhibits excellent wear resistance. To further improve its surface performance, laser remelting technology was employed in this study to modify the surface of nickel coating. In this study, pulsed laser with a wavelength of 1064 nm, pulse duration of 5 ms and laser spot diameter of 2 mm was employed to conduct remelting strengthening treatment on the nickel-based coating deposited on pure copper substrate. The effects of laser frequency and energy density on the coating were investigated by characterizing the surface morphology, microhardness, three-dimensional topography, and wear resistance of the laser-remelted samples. The results indicate that laser frequency influences the surface properties mainly by changing the overlapping ratio of the remelted spots. Laser energy density affects the remelting zone and thereby modifies the surface characteristics of the sample. When the laser frequency is 10 Hz and the energy density is 165.87 J/mm2, the sample obtains favorable surface roughness and wear resistance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Electronic Engineering, Suzhou University, Suzhou 234000, China.
- Anhui Lingzhou Technology Innovation Co., Ltd., Suzhou 234000, China.
- School of Business Administration, Guangxi University, Nanning 530004, China.
ORCID-Profile: Conghu Liu
Förderung
- Anhui Provincial Department of Education
Zitieren
APA
Li, H., Li, Y., Zhan, R., Shen, R., Song, X., & Liu, C. (2026). Optimization of Process Parameters for Laser Remelting Nickel Coating. Micromachines, 17(6), 646. https://doi.org/10.3390/mi17060646
Vancouver
Li H, Li Y, Zhan R, Shen R, Song X, Liu C. Optimization of Process Parameters for Laser Remelting Nickel Coating. Micromachines. 2026;17(6):646. doi:10.3390/mi17060646
BibTeX
@article{Li2026,
author = {Li, Hengzheng and Li, Yangyang and Zhan, Rui and Shen, Ruolan and Song, Xiaobo and Liu, Conghu},
title = {Optimization of Process Parameters for Laser Remelting Nickel Coating},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {6},
pages = {646},
doi = {10.3390/mi17060646}
}
EUVIMED