EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Bionic Bistable Compliant Mechanism for the LDI Machine

Ruizhou Wang iD, Junhong Li, Hua Wang

Micromachines · 22.05.2026 · 17 (6) · 640

DOI: 10.3390/mi17060640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.05.2026. Verfasst von Ruizhou Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation, Guangdong Association for Science and Technology Young Talent Program, Guangdong Province Brilliant Action Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rigid mechanisms (RMs) are widely adopted in the vision-based measurement (VBM) system of laser direct imaging (LDI) machines. Constant-stiffness compliant mechanisms (CMs) improve the performance of traditional RMs. Unfortunately, constant-stiffness CMs still exhibit high energy consumption and limited adaptability during fast focusing. Inspired by the hierarchical structure and mechanical behavior of ligaments and tendons, this paper proposes a bionic bistable compliant mechanism (BBCM) to replace constant-stiffness CMs. The BBCM exhibits dynamic stiffness characteristics throughout the focusing stroke, with low stiffness in the transition phase to reduce energy consumption during rapid focusing and high local stiffness near the stable positions to maintain focusing stability. A numerical model is established to analyze the variable-stiffness and bistable characteristics of the proposed BBCM. Prototype tests demonstrate the bistable response, dynamic feasibility, and energy-saving potential of the mechanism. Under the tested camera-loaded flying-shot condition, compared with the constant-stiffness CM, the BBCM reduces electrical and mechanical energy consumption by 12.37% and 9.74%, respectively. The target recognition results indicate that the BBCM-based system maintains comparable visual measurement performance. These results demonstrate that the proposed BBCM provides a feasible mechanism-level solution for energy-efficient dual-position focusing in LDI machines.

Schlagwörter

Stichwörter der Autor:innen

bionic mechanismbistable mechanismcompliant mechanismlaser direct imaging (LDI)

Autor:innen und Institutionen

  • State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, China.
  • Guangdong Provincial Key Laboratory of Industrial Intelligent Inspection Technology, Foshan University, Foshan 528000, China.
  • Guangdong Provincial Engineering Technology Research Center of Digital Lithography, Guangdong KST Optical Co., Ltd., Dongguan 523000, China.

ORCID-Profile: Ruizhou Wang

Förderung

  • Guangdong Basic and Applied Basic Research Foundation
  • Guangdong Association for Science and Technology Young Talent Program
  • Guangdong Province Brilliant Action Project
  • Research Fund of Guangdong Provincial Key Laboratory of Industrial Intelligent Inspection Technology
  • Commissioned Project of Enterprise
  • National Natural Science Foundation of China
  • “Ganpo Plan” Talent Project of Jiangxi Province

Zitieren

APA

Wang, R., Li, J., & Wang, H. (2026). Development of a Bionic Bistable Compliant Mechanism for the LDI Machine. Micromachines, 17(6), 640. https://doi.org/10.3390/mi17060640

Vancouver

Wang R, Li J, Wang H. Development of a Bionic Bistable Compliant Mechanism for the LDI Machine. Micromachines. 2026;17(6):640. doi:10.3390/mi17060640

BibTeX
@article{Wang2026,
  author = {Wang, Ruizhou and Li, Junhong and Wang, Hua},
  title = {Development of a Bionic Bistable Compliant Mechanism for the LDI Machine},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {6},
  pages = {640},
  doi = {10.3390/mi17060640}
}
Kostenlos starten →