EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Energy-Efficient LiDAR Receiver Using Time-to-Voltage Converter and SAR ADC in 180 nm CMOS

Bobin Seo iD, Sung-Min Park

Micromachines · 19.05.2026 · 17 (5) · 622

DOI: 10.3390/mi17050622 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 19.05.2026. Verfasst von Bobin Seo und 1 weiteren Autor:innen. Beteiligte Einrichtung: Division of Electronic & Semiconductor Engineering, Ewha Womans University, Seoul 03760, Republic of Korea. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes an energy-efficient LiDAR receiver topology based on a time-to-voltage converter (TVC) followed by a 5-bit SAR ADC. By converting the time-interval between START and STOP signals into the voltage domain, the proposed topology avoids the complexity of conventional TDC-based designs and enables the use of a moderate-speed, energy-efficient SAR ADC. The proposed TVC in the proposed LiDAR receiver consists of an on-chip avalanche photodiode (APD), a CMOS transimpedance-limiting amplifier (CTLA), a time-gating circuit, a ramp generator, and a peak-and-hold (PDH) block. Thereafter, the converted voltages are digitized by a VCM-based single-ended SAR ADC with a binary-weighted CDAC, a strong-arm latch comparator, and custom digital logic. A reset generator is also incorporated to coordinate the sampling, comparison, and settling phases. The proposed LiDAR receiver is implemented in a 180 nm CMOS process, where the TVC occupies an area of 171 μm × 98.8 μm, while the TVC-SAR receiver occupies 417 μm × 356 μm, respectively. The proposed LiDAR receiver consumes 13 mW from a single 1.8 V supply, in which the SAR ADC consumes 3.68 mW only. The TVC-SAR receiver resolves the time-intervals ranging from 7 ns to 32.1 ns with a resolution of 0.81 ns. Hence, the proposed topology provides an energy-efficient solution along with its reduced circuit complexity and chip implementation for short-range LiDAR applications.

Schlagwörter

Stichwörter der Autor:innen

CMOSLiDARSAR ADCTIAtime-to-voltage converter

Autor:innen und Institutionen

  • Division of Electronic & Semiconductor Engineering, Ewha Womans University, Seoul 03760, Republic of Korea.

ORCID-Profile: Bobin Seo

Förderung

  • Ministry of Science and ICT
  • National Research Foundation of Korea

Zitieren

APA

Seo, B., & Park, S. M. (2026). An Energy-Efficient LiDAR Receiver Using Time-to-Voltage Converter and SAR ADC in 180 nm CMOS. Micromachines, 17(5), 622. https://doi.org/10.3390/mi17050622

Vancouver

Seo B, Park SM. An Energy-Efficient LiDAR Receiver Using Time-to-Voltage Converter and SAR ADC in 180 nm CMOS. Micromachines. 2026;17(5):622. doi:10.3390/mi17050622

BibTeX
@article{Seo2026,
  author = {Seo, Bobin and Park, Sung-Min},
  title = {An Energy-Efficient LiDAR Receiver Using Time-to-Voltage Converter and SAR ADC in 180 nm CMOS},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {622},
  doi = {10.3390/mi17050622}
}
Kostenlos starten →