Chemical Modification Mechanism of SiC Substrates in Electrical Discharge Machining
Micromachines · 18.05.2026 · 17 (5) · 618
DOI: 10.3390/mi17050618 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.05.2026. Verfasst von Qiufa Luo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Project of the State Key Laboratory for High Performance Tools.
Abstract (Originalsprache)
Electrical discharge machining (EDM) is an efficient method for processing silicon carbide (SiC) substrates. However, the chemical modification mechanism of SiC substrates in the EDM process remains not fully elucidated. To clarify the material removal mechanism of SiC substrates in EDM, this study investigated the behaviors of SiC substrates under different discharge conditions through experimental analysis and interface temperature field simulation. Results indicate that the SiC substrates sequentially exhibit characteristic morphologies of surface oxidation, thermal decomposition, and fracture as discharge energy increases. A discolored layer composed of amorphous SiO2 is formed on the SiC surface in low-discharge energy. Crystalline silicon and graphitic carbon are generated from the thermal decomposition of SiC substrates in high-discharge energy. Excessively high discharge energy induces the breakdown of SiC substrates. A critical temperature threshold is identified that delineates the initiation of prominent thermal oxidation on the SiC surface. Temperature field simulations further reveal the correlation between EDM parameters and interfacial temperature variations, along with the mechanisms of material removal driven by thermal diffusion. This study deepens the fundamental understanding of the EDM removal mechanism of SiC substrates and is expected to provide a scientific basis for the efficient material removal of SiC substrates.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China.
- National & Local Joint Engineering Research Center for Intelligent Manufacturing Technology of Brittle Materials Products, Huaqiao University, Xiamen 361021, China.
- State Key Laboratory of High Performance Tools, Xiamen 361021, China.
- State Key Laboratory of High Performance Tools, Zhengzhou Abrasives Grinding Research Institute Co., Ltd., Zhengzhou 450001, China.
ORCID-Profile: Qiufa Luo
Förderung
- National Natural Science Foundation of China
- Open Project of the State Key Laboratory for High Performance Tools
Zitieren
APA
Luo, Q., Li, G., Wang, N., Wang, S., Lu, J., & Ke, C. (2026). Chemical Modification Mechanism of SiC Substrates in Electrical Discharge Machining. Micromachines, 17(5), 618. https://doi.org/10.3390/mi17050618
Vancouver
Luo Q, Li G, Wang N, Wang S, Lu J, Ke C. Chemical Modification Mechanism of SiC Substrates in Electrical Discharge Machining. Micromachines. 2026;17(5):618. doi:10.3390/mi17050618
BibTeX
@article{Luo2026,
author = {Luo, Qiufa and Li, Gu and Wang, Ningchang and Wang, Sirong and Lu, Jing and Ke, Congming},
title = {Chemical Modification Mechanism of SiC Substrates in Electrical Discharge Machining},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {5},
pages = {618},
doi = {10.3390/mi17050618}
}
EUVIMED