Parametric Optimization of a Star-Shaped Bluff Body for Enhanced VIV-Galloping Coupled Energy Harvesting
Micromachines · 17.05.2026 · 17 (5) · 616
DOI: 10.3390/mi17050616 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 17.05.2026. Verfasst von Li Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Anhui Institute of Information Technology, Xinwu Campus, Wuhu 241000, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Institute of Information Technology, Major Science and Technology Special Projects in Anhui Province, The overseas study visit and training program for out-standing young backbone talents of Anhui Province.
Abstract (Originalsprache)
Under low wind speed conditions, conventional bluff body energy harvesters suffer from a single vibration mechanism and a narrow effective wind speed range, making it difficult to meet the continuous power supply demands of miniature electronic devices. In this paper, by systematically optimizing the number of triangular prisms N and the circumferential installation angle α, a parametrically adjustable star-shaped energy harvester (SEH) is proposed. The proposed structure consists of a cylindrical base with a tunable number of triangular prisms uniformly distributed along its circumference, aiming to reveal the regulation mechanism of the VIV-galloping coupling response and energy harvesting performance. Conceptual design and theoretical modeling of the SEH are first carried out. Then, three-dimensional fluid–structure interaction simulations are performed by varying N and α, and a prototype is fabricated for wind tunnel experimental validation. The results show that under the optimal parameter combination of N = 7 and α = 51.4°, the SEH achieves a maximum output voltage of 12.2 V at a wind speed of 3.41 m/s, with a maximum output power of 1.488 mW, and the effective wind speed range is broadened to 2.5~12.44 m/s. Compared with the conventional cylindrical energy harvester (CEH), the SEH (N = 7) increases the maximum output voltage by 44.38%, the maximum output power by 108.4%, and expands the effective wind speed range by 198.50%. Through systematic optimization of key geometric parameters, this study achieves synergistic regulation of flow-induced vibration modes and performance enhancement, providing a parametric design basis for efficient low-speed wind energy harvesting, which can promote the development of self-powered technologies for micro-sensors and IoT devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Anhui Institute of Information Technology, Xinwu Campus, Wuhu 241000, China.
- College of Mechanical and Automotive Engineering, Anhui Polytechnic University, International Engineer College Campus, Wuhu 241000, China.
- Anhui Province Key Laboratory of Advanced Numerical Control & Servo Technology, Wuhu 241000, China.
ORCID-Profile: Li Zhang, Hai Wang, Chunlai Yang
Förderung
- Anhui Institute of Information Technology
- Major Science and Technology Special Projects in Anhui Province
- The overseas study visit and training program for out-standing young backbone talents of Anhui Province
- Anhui Province Higher Education Scientific Research Project
- Wuhu Science and Technology Plan Project
- Anhui Province Key Laboratory of Advanced Numerical Control & Servo Technology
- Anhui Polytechnic University
- Graduate Student Innovation Project of Anhui Province
Zitieren
APA
Zhang, L., Wang, H., Yang, C., Duan, W., & Peng, J. (2026). Parametric Optimization of a Star-Shaped Bluff Body for Enhanced VIV-Galloping Coupled Energy Harvesting. Micromachines, 17(5), 616. https://doi.org/10.3390/mi17050616
Vancouver
Zhang L, Wang H, Yang C, Duan W, Peng J. Parametric Optimization of a Star-Shaped Bluff Body for Enhanced VIV-Galloping Coupled Energy Harvesting. Micromachines. 2026;17(5):616. doi:10.3390/mi17050616
BibTeX
@article{Zhang2026,
author = {Zhang, Li and Wang, Hai and Yang, Chunlai and Duan, Weiwei and Peng, Jingjing},
title = {Parametric Optimization of a Star-Shaped Bluff Body for Enhanced VIV-Galloping Coupled Energy Harvesting},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {5},
pages = {616},
doi = {10.3390/mi17050616}
}
EUVIMED