Laser-Assisted Diamond Cutting for Low-Damage Fabrication of High-Q CaF2 Whispering-Gallery Mode Resonators
Micromachines · 07.05.2026 · 17 (5) · 581
DOI: 10.3390/mi17050581 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 07.05.2026. Verfasst von Rongbiao Yang und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Extreme Environment Optoelectronic Dynamic Measurement Technology and Instrument, North University of China, Taiyuan 030051, …. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State key Laboratory of Extreme Environment Optoelectronic Dynamic Measurement Technology and Instrument,North University of China, the General Program of National Natural Science Foundation of China under Grant, General Program of Shanxi Province Natural Science Foundation under Grant.
Abstract (Originalsprache)
Calcium fluoride (CaF2) crystals are an ideal material for fabricating high-quality whispering-gallery-mode (WGM) optical resonators. However, their hard and brittle nature make it difficult to achieve low-damage, ultra-smooth surfaces through conventional cutting, which limits the optical performance of the resonators. To address this, laser-assisted diamond cutting technology is proposed in this study for low-damage and high-quality fabrication. Molecular dynamics simulations reveal the atomic-scale mechanism by which laser thermal effects reduce cutting forces and promote dislocation motion. Nano-scratch experiments further show that the critical depth of ductile–brittle transition (DBT) increases from 388 nm to 1070 nm, 2.76 times that of conventional cutting. Based on these results, ultra-precision turning of a high-quality hemispherical resonator with a Q factor of up to 1.3 × 108 was achieved. This study provides an effective solution for low-damage and high-performance resonator fabrication from hard and brittle optical crystals.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Extreme Environment Optoelectronic Dynamic Measurement Technology and Instrument, North University of China, Taiyuan 030051, China.
- School of Semiconductors and Physics, North University of China, Taiyuan 030051, China.
ORCID-Profile: Huanfei Wen
Förderung
- State key Laboratory of Extreme Environment Optoelectronic Dynamic Measurement Technology and Instrument,North University of China
- the General Program of National Natural Science Foundation of China under Grant
- General Program of Shanxi Province Natural Science Foundation under Grant
- the Research Project Supported by Shanxi Scholarship Council of China under Grant
- Foundation of Science and Technology on Electronic Test and Measurement Laboratory
- State key Laboratory of Extreme Environment Optoelectronic Dynamic Measurement Technology and Instrument, North University of China
- National Natural Science Foundation of China
- Shanxi Province Natural Science Foundation
Zitieren
APA
Yang, R., Jia, T., Rong, J., Wen, H., Xu, Z., Song, Z., Xing, E., Tang, J., & Liu, J. (2026). Laser-Assisted Diamond Cutting for Low-Damage Fabrication of High-Q CaF2 Whispering-Gallery Mode Resonators. Micromachines, 17(5), 581. https://doi.org/10.3390/mi17050581
Vancouver
Yang R, Jia T, Rong J, Wen H, Xu Z, Song Z, et al. Laser-Assisted Diamond Cutting for Low-Damage Fabrication of High-Q CaF2 Whispering-Gallery Mode Resonators. Micromachines. 2026;17(5):581. doi:10.3390/mi17050581
BibTeX
@article{Yang2026,
author = {Yang, Rongbiao and Jia, Tao and Rong, Jiamin and Wen, Huanfei and Xu, Zhidong and Song, Zihan and Xing, Enbo and Tang, Jun and Liu, Jun},
title = {Laser-Assisted Diamond Cutting for Low-Damage Fabrication of High-Q CaF2 Whispering-Gallery Mode Resonators},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {5},
pages = {581},
doi = {10.3390/mi17050581}
}
EUVIMED