Cathode Design and Flow Field Optimization in Electrochemical Machining of Square Holes
Micromachines · 07.05.2026 · 17 (5) · 578
DOI: 10.3390/mi17050578 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 07.05.2026. Verfasst von Xuesong Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronic Engineering, Xi'an Technological University, Xi'an 710021, China. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shaanxi Normal University, Shaanxi Province Key Research and Development Program-International Cooperation Field.
Abstract (Originalsprache)
To improve the forming quality, precision, and machining stability of square hole structures in high-hardness gun steel (PCrNi3MoVA) during electrochemical machining (ECM). A planar cathode bottom design array with liquid holes is innovatively proposed in this paper to achieve uniform distribution of the flow field in discrete bottom machining gaps. The modeling and simulation of the flow field within the ECM gap were carried out using simulation software. A cathode with 25 outlet holes in an array distribution and a profile thickness of 1 mm was designed. However, sparking occurred on the cathode bottom surface during ECM experiments, leading to machining short-circuit. Further analysis and structural optimization were conducted on the sparking area of the cathode bottom surface. The introduction of flow guide grooves on the cathode bottom surface can effectively improve the uniformity of flow field distribution and the stability of the machining process, thereby solving the problem of manufacturing square holes in high-hardness gun steel materials. Finally, under the conditions of an electrolyte pressure of 0.7 MPa, a machining voltage of 12 V, a frequency of 2 kHz, a duty cycle of 60%, and a feed rate of 0.8 mm/min, a square hole with a side length of 10.2 mm was obtained, with a straightness error of ±0.05 mm and a filet radius of 0.38 ± 0.05 mm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechatronic Engineering, Xi'an Technological University, Xi'an 710021, China.
- Inner Mongolia North Heavy Industries Group Corp. Ltd., Baotou 014030, China.
- Shaanxi Engineering Research Center of Digital Precision Electrochemical Machining, Xi'an 710021, China.
ORCID-Profile: Fan Du
Förderung
- National Natural Science Foundation of China
- Shaanxi Normal University
- Shaanxi Province Key Research and Development Program-International Cooperation Field
- Research Program of Shaanxi Provincial Department of Education - Natural Science Special Project
- Shaanxi Province Key Research and Development Program—International Cooperation Field
- Xi’an Young and Middle-aged Leading Talents Program in Scientific and Technological Innovation
Zitieren
APA
Liu, X., Guo, Z., Du, F., Su, G., Chen, H., & Zhang, C. (2026). Cathode Design and Flow Field Optimization in Electrochemical Machining of Square Holes. Micromachines, 17(5), 578. https://doi.org/10.3390/mi17050578
Vancouver
Liu X, Guo Z, Du F, Su G, Chen H, Zhang C. Cathode Design and Flow Field Optimization in Electrochemical Machining of Square Holes. Micromachines. 2026;17(5):578. doi:10.3390/mi17050578
BibTeX
@article{Liu2026,
author = {Liu, Xuesong and Guo, Zhen and Du, Fan and Su, Guokang and Chen, Hua and Zhang, Chuanyun},
title = {Cathode Design and Flow Field Optimization in Electrochemical Machining of Square Holes},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {5},
pages = {578},
doi = {10.3390/mi17050578}
}
EUVIMED