EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of a SiC MOSFET Gate Driver Chip Based on Adaptive Active Drive Technology

Qidong Li, Yuxin Zhang, Baoqiang Huang, Weihua Zhang iD, Chen Chen, Jianming Lei, Desheng Zhang, Run Min iD, Qiaoling Tong

Micromachines · 30.04.2026 · 17 (5) · 558

DOI: 10.3390/mi17050558 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.04.2026. Verfasst von Qidong Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits, Huazhong University of Science and Technology, Wuhan 430074, China. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon carbide (SiC) MOSFETs are promising for high-efficiency, high-power-density power conversion owing to their high breakdown capability, fast switching speeds, and low switching losses. However, parasitic parameters can cause severe voltage/current overshoot and oscillation during high-speed switching, leading to electromagnetic interference and degraded performance. To address this issue, this study analyzes the mechanisms of current overshoot during turn-on and voltage overshoot during turn-off, and presents an adaptive active gate driver chip based on a three-stage driving current control strategy. By identifying key switching intervals and regulating segmented gate-drive current, the proposed chip can effectively suppress overshoot while reducing the switching loss. During turn-on, cross-cycle switching point regulation based on Miller plateau tracking is proposed to achieve adaptive control under different operating conditions, while the turn-off control is realized by peak sampling of the drain–source voltage. The chip was fabricated in the 180 nm BCD process. Compared with a conventional passive driver, the proposed driver reduces turn-on loss by 35.1% at 400 V/40 A under a dvDS/dt of 4.8 V/ns and reduces turn-off loss by 33.2% under a vDS overshoot of nearly 50 V. These results show that the proposed chip improves SiC MOSFET switching performance and provides a practical gate-driving solution.

Schlagwörter

Stichwörter der Autor:innen

EMI suppressionMiller plateau voltageSiC MOSFETactive gate driveradaptive controlcross-cycle regulation

Autor:innen und Institutionen

  • School of Integrated Circuits, Huazhong University of Science and Technology, Wuhan 430074, China.
  • School of Electronic Information, Wuhan University of Science and Technology, Wuhan 430081, China.

ORCID-Profile: Weihua Zhang, Run Min

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, Q., Zhang, Y., Huang, B., Zhang, W., Chen, C., Lei, J., Zhang, D., Min, R., & Tong, Q. (2026). Design of a SiC MOSFET Gate Driver Chip Based on Adaptive Active Drive Technology. Micromachines, 17(5), 558. https://doi.org/10.3390/mi17050558

Vancouver

Li Q, Zhang Y, Huang B, Zhang W, Chen C, Lei J, et al. Design of a SiC MOSFET Gate Driver Chip Based on Adaptive Active Drive Technology. Micromachines. 2026;17(5):558. doi:10.3390/mi17050558

BibTeX
@article{Li2026,
  author = {Li, Qidong and Zhang, Yuxin and Huang, Baoqiang and Zhang, Weihua and Chen, Chen and Lei, Jianming and Zhang, Desheng and Min, Run and Tong, Qiaoling},
  title = {Design of a SiC MOSFET Gate Driver Chip Based on Adaptive Active Drive Technology},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {558},
  doi = {10.3390/mi17050558}
}
Kostenlos starten →