EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Novel Design in Venturi-Type Nozzle by Selective Laser Melting for Enhancement in Microbubble Generation

Minhoo Chung, Changkyoo Park

Micromachines · 29.04.2026 · 17 (5) · 547

DOI: 10.3390/mi17050547 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.04.2026. Verfasst von Minhoo Chung und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Seoul National University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study applies selective laser melting (SLM) to fabricate stainless steel 316L (SS316L) structures on the distribution plate of a Venturi-type nozzle in a pressurized dissolution microbubble generator. SLM is employed because the fabricated structures are approximately hundreds of micrometers in size, making them difficult to produce using conventional milling or other machining methods. These structures are designed to enhance cavitation and gas–liquid interaction, thereby enhancing microbubble generation. Various conditions of the SLM process are conducted, and the combination of 140 W laser power, 100 mm/s scan speed, 30 µm layer thickness, and 120 µm hatch distance achieves the highest relative density while maintaining the austenite phase of SS316L, thus being selected as the optimal SLM process parameters. Microbubble generation test are conducted under three different dissolution tank pressure conditions (0.20, 0.25, and 0.30 MPa) using nozzles with and without the SLM structures. The generated microbubbles in both nozzles ranges from 1 to 110 µm, satisfying the size conditions for microbubbles. The average microbubble size is smaller in the SLM-assisted nozzle (31.8 µm) compared with the plain nozzle (38.8 µm). Furthermore, under the dissolution tank pressure of 0.30 MPa for 30 s, the SLM-assisted nozzle generates a maximum of 52,368 microbubbles, representing approximately a 102.1% increase compared with the plain nozzle (25,907 microbubbles). These results demonstrate that incorporating SLM structures to Venturi-type nozzle effectively enhances microbubble generation, offering promising potential for applications in water treatment, biomedical processes, and chemical engineering.

Schlagwörter

Stichwörter der Autor:innen

Venturi nozzlecavitationmicrobubbleselective laser melting

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.

Förderung

  • Seoul National University of Science and Technology

Zitieren

APA

Chung, M., & Park, C. (2026). Novel Design in Venturi-Type Nozzle by Selective Laser Melting for Enhancement in Microbubble Generation. Micromachines, 17(5), 547. https://doi.org/10.3390/mi17050547

Vancouver

Chung M, Park C. Novel Design in Venturi-Type Nozzle by Selective Laser Melting for Enhancement in Microbubble Generation. Micromachines. 2026;17(5):547. doi:10.3390/mi17050547

BibTeX
@article{Chung2026,
  author = {Chung, Minhoo and Park, Changkyoo},
  title = {Novel Design in Venturi-Type Nozzle by Selective Laser Melting for Enhancement in Microbubble Generation},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {547},
  doi = {10.3390/mi17050547}
}
Kostenlos starten →