EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Computer Numerical Control Wire Electrical Discharge Machining Strategy for Fabricating Cobalt–Copper Bimetallic Oxide Maze-like Micro-Supercapacitors

Ziliang Chen, Rui Xie, Chunlong Chen, Yiwei Zheng, Jianping Deng, Dawei Liu, Binbin Zheng, Wenxia Wang, Igor Zhitomirsky iD, Ri Chen iD

Micromachines · 23.04.2026 · 17 (5) · 516

DOI: 10.3390/mi17050516 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.04.2026. Verfasst von Ziliang Chen und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Electromechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510450, China. Die Arbeit nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Provincial Natural Science Foundation, Specialty Projects for General Universities in Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cobalt–copper bimetallic oxides (CoCuOx) show great potential for constructing high-performance micro-supercapacitors (MSCs) for micro-electronic applications. However, their poor conductivity and complex preparation procedures significantly hinder their broad applications. To address these challenges, oxygen-vacancy-modified CoCuOx-based binder-free electrodes were fabricated using a one-step computer numerical control wire electrical discharge machining (CNCWEDM) strategy. This approach enabled the fabrication of CoCuOx-based maze-like MSCs (CoCuMMSCs) with designable electrochemical performance, which could be simply controlled by their geometric shape and machining voltage. Subsequently, theoretical simulations were conducted for studying the effect of MSCs geometric shape on their capacitive behavior. Remarkably, the CoCuMMSCs fabricated by a machining voltage of 100 V achieved the maximum capacitance of 32.8 mF cm−2 at 0.15 mA cm−2. Furthermore, the CoCuMMSCs demonstrated outstanding performance at ultrahigh scan rates of up to 50,000 mV s−1, exceeding by more than two orders of magnitude the values previously reported in the literature. The obtained results proved that the development of the CNCWEDM technique facilitated manufacturing CoCuMMSCs devices with excellent performance by the comprehensive utilization of oxygen-vacancy incorporation, synergistic effect of cobalt and copper oxides, binder-free electrode design, proper device construction and controllable machining voltage. The advanced CNCWEDM strategy creates a new pathway for the high-efficiency fabrication of high-performance bimetallic-oxide-based micro-electronic devices, such as MSCs, intelligent micro-sensors and micro-batteries.

Schlagwörter

Stichwörter der Autor:innen

CoCuOxbinder-freecomputer numerical controlmicro-supercapacitoroxygen vacancywire electrical discharge machining

Autor:innen und Institutionen

  • School of Electromechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510450, China.
  • Biomedical and Pharmaceutical Sciences School, Guangdong University of Technology, Guangzhou 510006, China.
  • Materials Science and Engineering Department, McMaster University, Hamilton, ON L8S 4L8, Canada.

ORCID-Profile: Igor Zhitomirsky, Ri Chen

Förderung

  • National Natural Science Foundation of China
  • Guangdong Provincial Natural Science Foundation
  • Specialty Projects for General Universities in Guangdong Province
  • The Youth Scientific and Technological Talent Cultivation Program of the Guangdong Provincial Association for Science and Technology
  • Guangdong Basic and Applied Basic Research Foundation
  • Guangdong Polytechnic Normal University

Zitieren

APA

Chen, Z., Xie, R., Chen, C., Zheng, Y., Deng, J., Liu, D., Zheng, B., Wang, W., Zhitomirsky, I., & Chen, R. (2026). A Computer Numerical Control Wire Electrical Discharge Machining Strategy for Fabricating Cobalt–Copper Bimetallic Oxide Maze-like Micro-Supercapacitors. Micromachines, 17(5), 516. https://doi.org/10.3390/mi17050516

Vancouver

Chen Z, Xie R, Chen C, Zheng Y, Deng J, Liu D, et al. A Computer Numerical Control Wire Electrical Discharge Machining Strategy for Fabricating Cobalt–Copper Bimetallic Oxide Maze-like Micro-Supercapacitors. Micromachines. 2026;17(5):516. doi:10.3390/mi17050516

BibTeX
@article{Chen2026,
  author = {Chen, Ziliang and Xie, Rui and Chen, Chunlong and Zheng, Yiwei and Deng, Jianping and Liu, Dawei and Zheng, Binbin and Wang, Wenxia and Zhitomirsky, Igor and Chen, Ri},
  title = {A Computer Numerical Control Wire Electrical Discharge Machining Strategy for Fabricating Cobalt–Copper Bimetallic Oxide Maze-like Micro-Supercapacitors},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {516},
  doi = {10.3390/mi17050516}
}
Kostenlos starten →