EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Parameter Optimization Design of Heat Pipe Heat Sink for Bidirectional Power Converter Based on MOEDO Algorithm

Zechen Su, Xiwei Zhou, Yangfan Li, Qisheng Wu, Hongwei Zhang, Binyu Wang iD, Weiyu Liu iD

Micromachines · 23.04.2026 · 17 (5) · 514

DOI: 10.3390/mi17050514 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.04.2026. Verfasst von Zechen Su und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic and Control Engineering, Chang'an University, Xi'an 710064, China. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bidirectional power converters generate significant heat losses during high-frequency operation, posing a severe challenge to the performance of heat dissipation systems. Traditional thermal design methods often struggle to balance multiple objectives, such as cooling efficiency, cost, weight, and size, thereby limiting the reliability and safety of the system. To address these challenges, this paper proposes a novel Multi-Objective Exponential Distribution Optimizer algorithm based on the Exponential Distribution Optimizer. Subsequently, key design variables of the heat dissipation system are selected. Next, the Optimal Latin Hypercube Sampling method is employed to generate sample points, and a second-order response surface surrogate model for the heat pipe radiator’s volume and temperature is developed. Lastly, by integrating elite non-dominated sorting, crowding distance mechanisms, and an information feedback mechanism, the multi-objective challenge is decomposed into subproblems, thereby enhancing optimization efficiency. Through comparative simulation experiments on benchmark functions, the Wilcoxon signed-rank test results for the MOEDO algorithm on the majority of the three metrics are denoted as ‘+’, indicating statistically significant advantages over the compared algorithms, thereby demonstrating its superior performance in addressing multi-objective optimization problems. The study further conducts simulation verification of the heat pipe heat dissipation system before and after optimization using ANSYS Icepak. The simulation results demonstrate that, compared with the conventional design, the maximum Insulated Gate Bipolar Transistor (IGBT) temperature is reduced by 17.12% and the heat sink volume is reduced by 14.61%.

Schlagwörter

Stichwörter der Autor:innen

MOEDO (Multi-Objective Exponential Distribution Optimizer)bidirectional power converterheat sinkmulti-objective optimizationresponse surface surrogate model

Autor:innen und Institutionen

  • School of Electronic and Control Engineering, Chang'an University, Xi'an 710064, China.

ORCID-Profile: Binyu Wang, Weiyu Liu

Zitieren

APA

Su, Z., Zhou, X., Li, Y., Wu, Q., Zhang, H., Wang, B., & Liu, W. (2026). Multi-Objective Parameter Optimization Design of Heat Pipe Heat Sink for Bidirectional Power Converter Based on MOEDO Algorithm. Micromachines, 17(5), 514. https://doi.org/10.3390/mi17050514

Vancouver

Su Z, Zhou X, Li Y, Wu Q, Zhang H, Wang B, et al. Multi-Objective Parameter Optimization Design of Heat Pipe Heat Sink for Bidirectional Power Converter Based on MOEDO Algorithm. Micromachines. 2026;17(5):514. doi:10.3390/mi17050514

BibTeX
@article{Su2026,
  author = {Su, Zechen and Zhou, Xiwei and Li, Yangfan and Wu, Qisheng and Zhang, Hongwei and Wang, Binyu and Liu, Weiyu},
  title = {Multi-Objective Parameter Optimization Design of Heat Pipe Heat Sink for Bidirectional Power Converter Based on MOEDO Algorithm},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {514},
  doi = {10.3390/mi17050514}
}
Kostenlos starten →