EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Theoretical Analysis and Structural Optimization of Overload-Protected MEMS Hydrophones

Yuhan Ren, Jinming Ti, Qingqing Fan, Yanfeng Huang, Junhong Li

Micromachines · 20.04.2026 · 17 (4) · 500

DOI: 10.3390/mi17040500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.04.2026. Verfasst von Yuhan Ren und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Acoustics and Marine Information, Institute of Acoustics, Chinese Academy of Sciences, Beijing 100190, China. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

MEMS hydrophones, as critical sensors for maritime security and underwater information acquisition, have sensitive membrane structures that exhibit insufficient ability to withstand hydrostatic pressure, necessitating an overload-protection design. Based on buckling stability theory, a collaborative optimization method for overload-protection column design was proposed, integrating theoretical analysis, finite-element simulation, and process feasibility. An optimized design scheme for hydrophone overload-protection columns was established by comprehensively considering geometric buckling-resistant design, micro-gap anti-adhesion requirements, minimal impact on sensitivity, and micro/nano-fabrication constraints. The results indicate that intermediate slenderness columns with radii between 5.5 μm and 7.5 μm sufficiently meet both fabrication and operational requirements, effectively providing overload protection. Furthermore, at water depths not exceeding 382 m, the MEMS hydrophone can maintain the integrity of its membrane structure without column buckling.

Schlagwörter

Stichwörter der Autor:innen

MEMSbuckling stabilityhydrophoneoverload-protection design

Autor:innen und Institutionen

  • State Key Laboratory of Acoustics and Marine Information, Institute of Acoustics, Chinese Academy of Sciences, Beijing 100190, China.
  • University of Chinese Academy of Sciences, Beijing 100049, China.

Förderung

  • the National Key Research and Development Program of China
  • National Key Research and Development Program of China

Zitieren

APA

Ren, Y., Ti, J., Fan, Q., Huang, Y., & Li, J. (2026). Theoretical Analysis and Structural Optimization of Overload-Protected MEMS Hydrophones. Micromachines, 17(4), 500. https://doi.org/10.3390/mi17040500

Vancouver

Ren Y, Ti J, Fan Q, Huang Y, Li J. Theoretical Analysis and Structural Optimization of Overload-Protected MEMS Hydrophones. Micromachines. 2026;17(4):500. doi:10.3390/mi17040500

BibTeX
@article{Ren2026,
  author = {Ren, Yuhan and Ti, Jinming and Fan, Qingqing and Huang, Yanfeng and Li, Junhong},
  title = {Theoretical Analysis and Structural Optimization of Overload-Protected MEMS Hydrophones},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {4},
  pages = {500},
  doi = {10.3390/mi17040500}
}
Kostenlos starten →