Design and Fabrication of High-Frequency Resonant Micro-Accelerometer Based on Piezoelectric Stiffening Effect
Micromachines · 16.04.2026 · 17 (4) · 483
DOI: 10.3390/mi17040483 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.04.2026. Verfasst von Ankesh Todi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, University of Central Florida, Orlando, FL 32817, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this work, a novel approach for implementing a resonant micro-accelerometer is demonstrated that may extend the operating frequency of such devices to several tens of MHz, which may enable direct wireless signal transfer. The proposed resonant accelerometer consists of a hybrid structure: a piezoelectric micro-resonator and a capacitive mass-spring (CMS) system (that are mechanically separated but electrically interconnected). The sensor utilizes the piezoelectric stiffening mechanism, which translates the acceleration-induced displacement of the capacitive mass-spring (CMS) structure into a shift in the resonance frequency of the interconnected resonator. The operating principle is elaborated upon in detail, supported by simulation and experimental results. Additionally, a novel fabrication technique is presented to realize a suspended fixed bi-layer electrode for the CMS in which a hardened layer of photoresist is utilized as a sacrificial layer. The experimental sensitivity of a fully functional device is reported to be ~6 Hz/g at 25 MHz (~0.23 ppm/g), which closely matches the simulated sensitivity of ~7 Hz/g (~0.278 ppm/g) for the fabricated capacitive gap of ~7 µm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical Engineering, University of Central Florida, Orlando, FL 32817, USA.
ORCID-Profile: Ankesh Todi, Hakhamanesh Mansoorzare, Reza Abdolvand
Zitieren
APA
Todi, A., Mansoorzare, H., & Abdolvand, R. (2026). Design and Fabrication of High-Frequency Resonant Micro-Accelerometer Based on Piezoelectric Stiffening Effect. Micromachines, 17(4), 483. https://doi.org/10.3390/mi17040483
Vancouver
Todi A, Mansoorzare H, Abdolvand R. Design and Fabrication of High-Frequency Resonant Micro-Accelerometer Based on Piezoelectric Stiffening Effect. Micromachines. 2026;17(4):483. doi:10.3390/mi17040483
BibTeX
@article{Todi2026,
author = {Todi, Ankesh and Mansoorzare, Hakhamanesh and Abdolvand, Reza},
title = {Design and Fabrication of High-Frequency Resonant Micro-Accelerometer Based on Piezoelectric Stiffening Effect},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {4},
pages = {483},
doi = {10.3390/mi17040483}
}
EUVIMED