A K-Band Four-Channel Beamformer with Temperature Compensation Based on 65 nm CMOS Process
Micromachines · 10.04.2026 · 17 (4) · 462
DOI: 10.3390/mi17040462 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 10.04.2026. Verfasst von Cetian Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Microelectronics, Northwestern Polytechnical University, Xi'an 710129, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents a K-band four-channel phased array beamformer with temperature compensation in 65 nm CMOS for 5G and satellite communications. The beamformer includes a four-way power divider/combiner, four RF channels, and digital control circuits. Each RF channel comprises a receive chain, a transmit chain, and a pair of receive/transmit (TX/RX) single-pole double-throw (SPDT) switches. The receive chain consists of a low-noise amplifier (LNA), a six-bit reflective-type phase shifter (RTPS), a drive amplifier (DA), two temperature-compensation attenuators (TCAs), and a six-bit attenuator (ATT); the transmit chain integrates a power amplifier (PA), two TCAs, a six-bit RTPS, a DA, and a six-bit ATT. Measurements show the chip exhibits 0–4.5 dB gain, noise figure (NF) < 7.8 dB, root mean square (RMS) phase error < 3.5°, and RMS gain error < 0.4 dB in receive mode operating in 19–23 GHz. In transmit mode operating in 21–23 GHz, it provides 6–10 dB gain range, RMS phase error < 3.4°, RMS gain error < 0.25 dB, and output power at 1 dB compression point (OP1dB) > 6.5 dBm. In addition, the receive and transmit gain variations are within 0.8 dB and 0.4 dB, respectively, when temperature ranges from −55 °C to 85 °C. With a compact footprint of 3.5 × 4.8 mm2, the beamformer consumes 110 mW (receive) and 190 mW (transmit) DC power per channel.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Microelectronics, Northwestern Polytechnical University, Xi'an 710129, China.
- Chengdu Ganide Technology Company, Ltd., Chengdu 610220, China.
Zitieren
APA
Wang, C., Liu, Y., Liao, X., Zhang, F., Deng, C., Liu, Y., Sun, W., Guan, H., & Zhou, D. (2026). A K-Band Four-Channel Beamformer with Temperature Compensation Based on 65 nm CMOS Process. Micromachines, 17(4), 462. https://doi.org/10.3390/mi17040462
Vancouver
Wang C, Liu Y, Liao X, Zhang F, Deng C, Liu Y, et al. A K-Band Four-Channel Beamformer with Temperature Compensation Based on 65 nm CMOS Process. Micromachines. 2026;17(4):462. doi:10.3390/mi17040462
BibTeX
@article{Wang2026,
author = {Wang, Cetian and Liu, Yanning and Liao, Xuejie and Zhang, Fan and Deng, Chun and Liu, Ying and Sun, Wenxu and Guan, He and Zhou, Deyun},
title = {A K-Band Four-Channel Beamformer with Temperature Compensation Based on 65 nm CMOS Process},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {4},
pages = {462},
doi = {10.3390/mi17040462}
}
EUVIMED