A Drive–Vibration Integrated Piezoelectric Actuator for Flexible Electrode Implantation
Micromachines · 03.04.2026 · 17 (4) · 447
DOI: 10.3390/mi17040447 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 03.04.2026. Verfasst von Xinhui Li und 11 weiteren Autor:innen. Beteiligte Einrichtung: The Institute of Precision Machinery and Smart Structure, College of Engineering, Zhejiang Normal University, Jinhua 321004, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation, National Natural Science Foundation of China, Zhejiang Provincial Natural Science Foundation of China.
Abstract (Originalsprache)
In this paper, a drive–vibration integrated piezoelectric actuator (DVIPA) is proposed for vibration-assisted implantation of flexible electrodes. Conventional implantation systems typically rely on separate actuation and vibration modules, which increase system complexity and limit integration. To address this limitation, the proposed DVIPA integrates driving and vibration functions within a single compact structure by employing two piezoelectric bimorphs for clamping and a piezoelectric stack for combined actuation. A composite excitation waveform, consisting of high-frequency sinusoidal signals superimposed on the rising stage of a low-frequency trapezoidal wave, is applied to simultaneously generate forward motion and vibration. This configuration enables a coupled motion mode that facilitates insertion while reducing the risk of buckling. A prototype of the DVIPA was developed and experimentally evaluated. The results show that vibration-assisted implantation can be achieved under various operating conditions, with independently adjustable driving and vibration parameters. A maximum speed of 328 μm/s is obtained, meeting the requirements for flexible electrode implantation. Agarose gel experiments further demonstrate that vibration frequencies above 40 Hz and voltages between 20 and 40 V can effectively assist implantation of polydimethylsiloxane (PDMS) without buckling failure. Overall, the proposed actuator provides a compact and integrated solution for vibration-assisted implantation, offering potential advantages in applications with limited space.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The Institute of Precision Machinery and Smart Structure, College of Engineering, Zhejiang Normal University, Jinhua 321004, China.
- Xingzhi College, Zhejiang Normal University, Jinhua 321004, China.
- Hangzhou Zhiyuan Research Institute Co., Ltd., No. 188, Yunzhan Road, Xihu District, Hangzhou 310012, China.
ORCID-Profile: Jijie Ma, Yili Hu, Jianping Li, Jianming Wen
Förderung
- Zhejiang Provincial Natural Science Foundation
- National Natural Science Foundation of China
- Zhejiang Provincial Natural Science Foundation of China
Zitieren
APA
Li, X., Wu, D., Lin, X., Jiang, T., Ma, J., Li, Y., Hu, Y., Wang, Y., Zhong, H., Yang, X., Li, J., & Wen, J. (2026). A Drive–Vibration Integrated Piezoelectric Actuator for Flexible Electrode Implantation. Micromachines, 17(4), 447. https://doi.org/10.3390/mi17040447
Vancouver
Li X, Wu D, Lin X, Jiang T, Ma J, Li Y, et al. A Drive–Vibration Integrated Piezoelectric Actuator for Flexible Electrode Implantation. Micromachines. 2026;17(4):447. doi:10.3390/mi17040447
BibTeX
@article{Li2026,
author = {Li, Xinhui and Wu, Di and Lin, Xiaohui and Jiang, Tianyu and Ma, Jijie and Li, Ya and Hu, Yili and Wang, Yingting and Zhong, Hongbo and Yang, Xinyu and Li, Jianping and Wen, Jianming},
title = {A Drive–Vibration Integrated Piezoelectric Actuator for Flexible Electrode Implantation},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {4},
pages = {447},
doi = {10.3390/mi17040447}
}
EUVIMED