EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

UV-LIGA Microfabrication for 1.1 THz Staggered Double-Grating Slow-Wave Structures

Qi Jiang iD, Xinghui Li iD, Yuanfei Hui, Pan Pan, Jinjun Feng iD

Micromachines · 31.03.2026 · 17 (4) · 427

DOI: 10.3390/mi17040427 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 31.03.2026. Verfasst von Qi Jiang und 4 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Science and Technology on Vacuum Electronics, Beijing Vacuum Electronics Research Institute, Beijing 100015, China. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a 1.1 THz staggered double-grating slow-wave structure (SWS) for traveling wave tubes (TWTs) is fabricated using UV-LIGA processes based on RD-2150 photoresist. The designed SWS has a wide side of 170 μm and a narrow side of 50 μm, and when half of the SWS is fabricated, the height of the structure is 85 μm, which is half of the wide side. The fabrication process includes lithography, electroforming, grinding, polishing, and resist removal. The top surface, bottom surface, and sidewall roughness of the as-fabricated structure were measured to be 21 nm, 20 nm, and 17 nm. The mean measured sidewall verticality of the structure was 90.1°, with a standard deviation of 0.5° obtained from four independent sampling positions. For the structure’s nominal dimensions of 85 μm in height and 50 μm in width, the achieved dimensional accuracies were ±2 μm and ±1 μm, with corresponding standard deviations of 1.05 μm and 0.59 μm, respectively, confirming excellent structural uniformity. We subsequently evaluated the impact of these dimensional deviations on the electromagnetic performance of the structure. The results indicate that the deviations had a negligible effect on the dispersion characteristics. Specifically, the linewidth deviation led to a 21% reduction in coupling impedance, while the height deviation caused a 600 V increase in the synchronous operating voltage.

Schlagwörter

Stichwörter der Autor:innen

UV-LIGAmicro-electro-mechanical system (MEMS)slow-wave structure (SWS)staggered double-grating

Autor:innen und Institutionen

  • National Key Laboratory of Science and Technology on Vacuum Electronics, Beijing Vacuum Electronics Research Institute, Beijing 100015, China.

ORCID-Profile: Qi Jiang, Xinghui Li, Jinjun Feng

Zitieren

APA

Jiang, Q., Li, X., Hui, Y., Pan, P., & Feng, J. (2026). UV-LIGA Microfabrication for 1.1 THz Staggered Double-Grating Slow-Wave Structures. Micromachines, 17(4), 427. https://doi.org/10.3390/mi17040427

Vancouver

Jiang Q, Li X, Hui Y, Pan P, Feng J. UV-LIGA Microfabrication for 1.1 THz Staggered Double-Grating Slow-Wave Structures. Micromachines. 2026;17(4):427. doi:10.3390/mi17040427

BibTeX
@article{Jiang2026,
  author = {Jiang, Qi and Li, Xinghui and Hui, Yuanfei and Pan, Pan and Feng, Jinjun},
  title = {UV-LIGA Microfabrication for 1.1 THz Staggered Double-Grating Slow-Wave Structures},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {4},
  pages = {427},
  doi = {10.3390/mi17040427}
}
Kostenlos starten →