EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Intelligent Temperature Compensation Method for Pressure Sensors Under High-Temperature and High-Pressure Conditions Based on a Modified Slime Mold Algorithm

Yang Zhao iD, Wanlu Jiang, Enyu Tang, Chengpeng Yu, Mengda Zhang, Zhenbao Li iD, Yongyong Li

Micromachines · 25.03.2026 · 17 (4) · 398

DOI: 10.3390/mi17040398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 25.03.2026. Verfasst von Yang Zhao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, The Natural Science Foundation of Hebei Province of China, the Xinjiang Uygur Autonomous Region Key Research and Development Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During deep and ultra-deep oil and gas drilling, downhole high-temperature and high-pressure conditions significantly affect the measurement accuracy of piezoresistive pressure sensors. To improve measurement accuracy under such extreme conditions, this study proposes an intelligent temperature compensation method based on a Modified Slime Mold Algorithm (MSMA). An experimental platform covering the full operating range of 0–175 °C and 0–170 MPa was established to acquire sensor outputs, and samples were collected at various temperature and pressure points to construct a dataset. Key parameters of the compensation model were optimized using the MSMA, enhancing the model’s fitting capability. Results indicate that, after compensation, the sensor exhibits a maximum full-scale error of 0.26% and a maximum sensitivity drift of −0.019% FS/°C, significantly reducing errors compared with traditional interpolation and polynomial fitting methods. The optimized compensation model was further deployed on an embedded hardware platform, enabling high-precision temperature compensation in an engineering context. Experimental data demonstrate that the embedded implementation maintains compensation accuracy while meeting real-time application requirements, making it suitable for downhole pressure monitoring and for output correction of other intelligent sensors operating under complex field conditions.

Schlagwörter

Stichwörter der Autor:innen

Modified Slime Mold Algorithm (MSMA)embedded system implementationpiezoresistive pressure sensortemperature compensation

Autor:innen und Institutionen

  • School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China.
  • Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control, Yanshan University, Qinhuangdao 066004, China.
  • Engineering Technology Research Institute of CNPC Xibu Drilling Engineering Company Limited, Karamay 834000, China.

ORCID-Profile: Yang Zhao, Zhenbao Li

Förderung

  • National Natural Science Foundation of China
  • The Natural Science Foundation of Hebei Province of China
  • the Xinjiang Uygur Autonomous Region Key Research and Development Program
  • Natural Science Foundation of Hebei Province of China
  • Xinjiang Uygur Autonomous Region Key Research and Development Program

Zitieren

APA

Zhao, Y., Jiang, W., Tang, E., Yu, C., Zhang, M., Li, Z., & Li, Y. (2026). An Intelligent Temperature Compensation Method for Pressure Sensors Under High-Temperature and High-Pressure Conditions Based on a Modified Slime Mold Algorithm. Micromachines, 17(4), 398. https://doi.org/10.3390/mi17040398

Vancouver

Zhao Y, Jiang W, Tang E, Yu C, Zhang M, Li Z, et al. An Intelligent Temperature Compensation Method for Pressure Sensors Under High-Temperature and High-Pressure Conditions Based on a Modified Slime Mold Algorithm. Micromachines. 2026;17(4):398. doi:10.3390/mi17040398

BibTeX
@article{Zhao2026,
  author = {Zhao, Yang and Jiang, Wanlu and Tang, Enyu and Yu, Chengpeng and Zhang, Mengda and Li, Zhenbao and Li, Yongyong},
  title = {An Intelligent Temperature Compensation Method for Pressure Sensors Under High-Temperature and High-Pressure Conditions Based on a Modified Slime Mold Algorithm},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {4},
  pages = {398},
  doi = {10.3390/mi17040398}
}
Kostenlos starten →