Preparation and Properties Study of a Thermal Conductive Silicone Adhesive Applied in Advanced Packaging
Micromachines · 25.03.2026 · 17 (4) · 394
DOI: 10.3390/mi17040394 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 25.03.2026. Verfasst von Yuwen Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In 2.5D/3D stacked advanced packaging, thermal conductive silicone adhesives are widely employed to achieve structural bonding and efficient heat dissipation. In this study, one thermal conductive silicone adhesive was prepared using medium viscosity vinyl silicone oil, hydrogen-containing silicone oil, and micron-sized alumina powder as the primary components. The results demonstrated that the adhesive exhibited excellent thermal and mechanical performance. Specifically, its thermal decomposition temperature exceeded 400 °C, the thermal conductivity reached over 1.80 W·m−1·K−1, and the thermal resistance was below 12.0 °C·cm2·W−1. The shear strength exceeded 5.00 MPa. Furthermore, after exposure to an unbiased highly accelerated stress test for 384 h, 1000 thermal cycles, and thermal aging for 1000 h, the adhesive maintained stable thermal conductivity and mechanical properties. The thermal conductivity remained above 1.70 W·m−1·K−1, and the shear strength remained higher than 5.00 MPa. In addition, the tensile modulus was maintained below 100 MPa, and the coefficient of linear thermal expansion was less than 160 ppm·°C−1. Overall, the comprehensive performance of the adhesive satisfies the reliability requirements for advanced packaging substrates and heat dissipation lid assemblies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China.
- U-Bond Technology Inc., Dongguan 523800, China.
- School of Materials Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.
Zitieren
APA
Xu, Y., Liu, L., Wang, W., Jiang, M., Yang, H., Chen, T., & Jia, K. (2026). Preparation and Properties Study of a Thermal Conductive Silicone Adhesive Applied in Advanced Packaging. Micromachines, 17(4), 394. https://doi.org/10.3390/mi17040394
Vancouver
Xu Y, Liu L, Wang W, Jiang M, Yang H, Chen T, et al. Preparation and Properties Study of a Thermal Conductive Silicone Adhesive Applied in Advanced Packaging. Micromachines. 2026;17(4):394. doi:10.3390/mi17040394
BibTeX
@article{Xu2026,
author = {Xu, Yuwen and Liu, Liangjun and Wang, Wenfei and Jiang, Minghua and Yang, Haibing and Chen, Tingxin and Jia, Kun},
title = {Preparation and Properties Study of a Thermal Conductive Silicone Adhesive Applied in Advanced Packaging},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {4},
pages = {394},
doi = {10.3390/mi17040394}
}
EUVIMED