EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Dual-Mode Memristor-Based Oscillator for Energy-Efficient Biomedical Wireless Systems

Imen Barraj iD, Mohamed Masmoudi

Micromachines · 24.03.2026 · 17 (4) · 393

DOI: 10.3390/mi17040393 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 24.03.2026. Verfasst von Imen Barraj und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Computer Engineering, College of Computer Engineering and Sciences, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabi…. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam bin Abdulaziz University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a novel dual-mode memristor-based ring oscillator designed for energy-efficient, wireless biomedical signal conditioning systems. The proposed architecture leverages a compact DTMOS memristor emulator, consisting of only two transistors and one capacitor, to replace the conventional NMOS pull-down devices in a three-stage PMOS ring oscillator. This integration enables two distinct operating modes within a single compact core: a fixed-frequency mode for stable clock generation and carrier synthesis, and a programmable chirp mode for frequency-modulated signal generation. The fixed-frequency mode achieves continuous tuning from 3.142 GHz to 4.017 GHz via varactor control, with an ultra-low power consumption of only 111 µW at 4.017 GHz. The chirp mode generates linear frequency sweeps starting from 0.8 GHz, with the sweep range independently controllable through the state capacitor value and the pulse width of the control signal (SWChirp). Designed in a standard 0.18 µm CMOS process, the oscillator exhibits a low phase noise of −87.82 dBc/Hz at a 1 MHz offset for the three-stage configuration, improving to −94.3 dBc/Hz for the five-stage design. The overall frequency coverage spans 0.8–4.017 GHz, representing a 133.6% fractional range. The calculated figure of merit (FoM) is −169.45 dBc/Hz. Experimental validation using a discrete CD4007 prototype confirms the oscillation principle, while comprehensive simulations demonstrate robust performance across process corners and temperature variations. With its zero-static-power memristor core, wide tunability, and dual-mode reconfigurability, the proposed oscillator is ideally suited for multi-standard wireless biomedical applications, including implantable telemetry, neural stimulation, ultra-wideband (UWB) transmitters, and non-contact vital sign monitoring.

Schlagwörter

Stichwörter der Autor:innen

DTMOSbiomedical signal conditioningchirp generatordual-mode oscillatormemristor emulatorring VCOwireless telemetry

Autor:innen und Institutionen

  • Department of Computer Engineering, College of Computer Engineering and Sciences, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia.
  • Systems Integration & Emerging Energies (SI2E), Electrical Engineering Department, National Engineering School of Sfax, University of Sfax, Sfax 3038, Tunisia.

ORCID-Profile: Imen Barraj

Förderung

  • Prince Sattam bin Abdulaziz University

Zitieren

APA

Barraj, I., & Masmoudi, M. (2026). A Dual-Mode Memristor-Based Oscillator for Energy-Efficient Biomedical Wireless Systems. Micromachines, 17(4), 393. https://doi.org/10.3390/mi17040393

Vancouver

Barraj I, Masmoudi M. A Dual-Mode Memristor-Based Oscillator for Energy-Efficient Biomedical Wireless Systems. Micromachines. 2026;17(4):393. doi:10.3390/mi17040393

BibTeX
@article{Barraj2026,
  author = {Barraj, Imen and Masmoudi, Mohamed},
  title = {A Dual-Mode Memristor-Based Oscillator for Energy-Efficient Biomedical Wireless Systems},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {4},
  pages = {393},
  doi = {10.3390/mi17040393}
}
Kostenlos starten →