EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Fringing Field Micro-Moisture Sensor with Elements Optimization

Xiangrui Meng iD, Chong Li iD, Yunlong Lan, Lining Tan iD, Xiaoxiao Zhang

Micromachines · 23.03.2026 · 17 (3) · 388

DOI: 10.3390/mi17030388 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.03.2026. Verfasst von Xiangrui Meng und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Automation and Measurement, Ocean University of China, Qingdao 266100, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research demonstrates the principle and optimization methodology to create economic and miniaturized high-resolution micro-moisture sensors. The interdigitated fringe electric field-based moisture measurement principle is firstly investigated to sketch the key parameters of printed circuit board (PCB)-based sensors for further performance optimization. Then, a comprehensive study is conducted to analyze parameter variations with conclusions of suggested design rules to achieve higher measurement sensitivity. Two prototypes are designed and manufactured to validate the proposed theoretical contributions. Water droplets are employed to control the ambient relative humidity, which is adopted as the actual moisture variable in this work. A double-correlated sampling circuit is used for capacitance sensing. Both of them demonstrate a linearity of 1% and sensitivity of 0.1 pF/mg levels, but prototype 2 gains a better batch consistency, which is beneficial for commercialization. Further data analysis suggests that the equivalent input–output sensitivity reaches a level of 1.2403 pF/%RH (relative humidity), which is significantly higher than other types of published interdigitated fringe electric field-type moisture sensors. The optimized prototypes also show advantages of miniaturized size, low cost and high consistency, which can potentially impact the industry applications.

Schlagwörter

Stichwörter der Autor:innen

fringing electric field sensormoisture detectionsensor optimization

Autor:innen und Institutionen

  • Department of Automation and Measurement, Ocean University of China, Qingdao 266100, China.
  • School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China.
  • School of Electronics and Information Engineering, Rocket Force University of Engineering, Xi'an 710025, China.
  • Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China.

ORCID-Profile: Xiangrui Meng, Chong Li, Lining Tan

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Meng, X., Li, C., Lan, Y., Tan, L., & Zhang, X. (2026). Enhanced Fringing Field Micro-Moisture Sensor with Elements Optimization. Micromachines, 17(3), 388. https://doi.org/10.3390/mi17030388

Vancouver

Meng X, Li C, Lan Y, Tan L, Zhang X. Enhanced Fringing Field Micro-Moisture Sensor with Elements Optimization. Micromachines. 2026;17(3):388. doi:10.3390/mi17030388

BibTeX
@article{Meng2026,
  author = {Meng, Xiangrui and Li, Chong and Lan, Yunlong and Tan, Lining and Zhang, Xiaoxiao},
  title = {Enhanced Fringing Field Micro-Moisture Sensor with Elements Optimization},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {3},
  pages = {388},
  doi = {10.3390/mi17030388}
}
Kostenlos starten →