First-Principles Calculations and PMUT Applications of Piezoelectric Thin-Film Materials
Micromachines · 20.03.2026 · 17 (3) · 377
DOI: 10.3390/mi17030377 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.03.2026. Verfasst von Chengwei Che und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic and Information Engineering, Soochow University, Suzhou 215006, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
High-performance piezoelectric micromachined ultrasonic transducers (PMUTs) are crucial for portable medical imaging and sensing. The efficiency of advanced PMUTs relies on high-quality piezoelectric thin films and optimized device designs. However, variability in common piezoelectric thin films like ScxAl1−xN (ScAlN) and PbZr1−xTixO3 (PZT) often leads to inaccurate material parameters—especially those derived from thick ceramics. To enhance simulation accuracy in standard designs affected by these inconsistencies, this work introduces an optimization framework combining first-principles calculations with multiphysics simulations. First, the intrinsic properties of PZT and ScAlN are analyzed through atomistic calculations, confirming that PZT, with its higher electromechanical coupling coefficient, is better suited for actuation. The parameters obtained from these calculations calibrate the finite-element model, addressing issues of missing or inaccurate data in commercial software libraries. Next, an efficient analytical acoustic-field model is developed. Compared to full-wave simulations in COMSOL, this model significantly reduces computational cost while maintaining accuracy, allowing for quicker scanning and optimization of large-array topologies. Additionally, results demonstrate that each individual hexagonal PMUT element outperforms a comparable circular element, achieving a peak SPL of 90.4 dB at 4.9 MHz versus 89.7 dB at 2.8 MHz. This higher acoustic output and operating frequency enable improved spatial resolution and sensitivity. This modeling approach, based on intrinsic material properties, provides a solid theoretical foundation for designing high-precision, low-power ultrasonic devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electronic and Information Engineering, Soochow University, Suzhou 215006, China.
ORCID-Profile: Dacheng Xu
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Che, C., Yi, S., Zhang, C., Zheng, X., He, X., & Xu, D. (2026). First-Principles Calculations and PMUT Applications of Piezoelectric Thin-Film Materials. Micromachines, 17(3), 377. https://doi.org/10.3390/mi17030377
Vancouver
Che C, Yi S, Zhang C, Zheng X, He X, Xu D. First-Principles Calculations and PMUT Applications of Piezoelectric Thin-Film Materials. Micromachines. 2026;17(3):377. doi:10.3390/mi17030377
BibTeX
@article{Che2026,
author = {Che, Chengwei and Yi, Shanqing and Zhang, Caishuo and Zheng, Xinyi and He, Xingli and Xu, Dacheng},
title = {First-Principles Calculations and PMUT Applications of Piezoelectric Thin-Film Materials},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {3},
pages = {377},
doi = {10.3390/mi17030377}
}
EUVIMED