A Review of the Machining Mechanisms in Field-Assisted Cutting of Brittle Materials
Micromachines · 15.03.2026 · 17 (3) · 361
DOI: 10.3390/mi17030361 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 15.03.2026. Verfasst von Xuexiang Sheng und 2 weiteren Autor:innen. Beteiligte Einrichtung: Engineering and Technology Innovation Center, Shandong Harbor Engineering Group Co., Ltd., Rizhao 276800, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 179 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Intelligent Manufacturing Equipment and Technology.
Abstract (Originalsprache)
Brittle materials such as single crystals, polycrystalline ceramics, and amorphous glass are indispensable in modern industry. Driven by improvements in equipment performance, the required fabrication precision for optical elements and devices has reached nanoscale and is steadily advancing toward atomic level. Despite their outstanding physical and chemical properties, fabricating a defect-free surface with nanometer-level roughness on brittle materials is challenging due to microcracking, brittle fracture and severe tool wear. In recent years, field-assisted cutting has emerged to overcome the bottleneck in ultra-precision cutting of brittle materials. This review summarizes investigations of material removal mechanisms of brittle materials in ultra-precision cutting and surveys representative field-assisted cutting technologies—including laser, vibration, magnetic field, and ion implantation assisted cutting—highlighting how these fields broaden ductile-regime machining and suppress the machining-induced defects. This review further discusses the emerging multi-field coupling strategies and outlines future research directions in machining mechanisms to enable high-efficiency, low-damage, and high-consistency manufacturing of brittle materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Engineering and Technology Innovation Center, Shandong Harbor Engineering Group Co., Ltd., Rizhao 276800, China.
- State Key Laboratory of Ultra-Precision Machining Technology, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong 999077, China.
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
ORCID-Profile: Changlin Liu
Förderung
- State Key Laboratory of Intelligent Manufacturing Equipment and Technology
Zitieren
APA
Sheng, X., Zhu, Z., & Liu, C. (2026). A Review of the Machining Mechanisms in Field-Assisted Cutting of Brittle Materials. Micromachines, 17(3), 361. https://doi.org/10.3390/mi17030361
Vancouver
Sheng X, Zhu Z, Liu C. A Review of the Machining Mechanisms in Field-Assisted Cutting of Brittle Materials. Micromachines. 2026;17(3):361. doi:10.3390/mi17030361
BibTeX
@article{Sheng2026,
author = {Sheng, Xuexiang and Zhu, Zhanchen and Liu, Changlin},
title = {A Review of the Machining Mechanisms in Field-Assisted Cutting of Brittle Materials},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {3},
pages = {361},
doi = {10.3390/mi17030361}
}
EUVIMED