EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD Simulation and Structural Optimization Analysis of Micromixing Processes in T-Shaped Microreactors

Yongzhi Ning, Bo Wang, Runci Wang, Taihong Yan

Micromachines · 11.02.2026 · 17 (2) · 234

DOI: 10.3390/mi17020234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 11.02.2026. Verfasst von Yongzhi Ning und 3 weiteren Autor:innen. Beteiligte Einrichtung: China Institute of Atomic Energy, Beijing 102413, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microreactors offer remarkable advantages in intensifying mixing/mass transfer and hold promising prospects for industrial applications. In this study, T-shaped microreactors (TMRs) integrated with baffle, orifice-plate, and venturi structures (featuring different contraction angles) were designed. Based on the Villermaux–Dushman reaction system, three-dimensional computational fluid dynamics (CFD) models were established to simulate the fluid flow and mixing-reaction processes in these microreactors. The results demonstrate that peaks in velocity, turbulent kinetic energy, and turbulent dissipation rate consistently emerge in the confluence region of the two fluid streams. In the operating range of this study, the baffle configuration exhibits the highest micromixing performance but also induces the largest pressure drop, followed by the orifice-plate structure. Notably, the venturi structure not only enhances micromixing efficiency but also results in a minimal increase in pressure drop and eliminates flow dead zones. Specifically, the venturi structure with a 45° contraction angle achieves a balance between energy consumption and micromixing efficiency. Using the agglomeration model, the micromixing times of the microreactors with various structures were determined to range from 0.025 to 0.234 ms.

Schlagwörter

Stichwörter der Autor:innen

computational fluid dynamics (CFD)micromixingmicroreactorprocess intensificationventuri structure

Autor:innen und Institutionen

  • China Institute of Atomic Energy, Beijing 102413, China.

Zitieren

APA

Ning, Y., Wang, B., Wang, R., & Yan, T. (2026). CFD Simulation and Structural Optimization Analysis of Micromixing Processes in T-Shaped Microreactors. Micromachines, 17(2), 234. https://doi.org/10.3390/mi17020234

Vancouver

Ning Y, Wang B, Wang R, Yan T. CFD Simulation and Structural Optimization Analysis of Micromixing Processes in T-Shaped Microreactors. Micromachines. 2026;17(2):234. doi:10.3390/mi17020234

BibTeX
@article{Ning2026,
  author = {Ning, Yongzhi and Wang, Bo and Wang, Runci and Yan, Taihong},
  title = {CFD Simulation and Structural Optimization Analysis of Micromixing Processes in T-Shaped Microreactors},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {234},
  doi = {10.3390/mi17020234}
}
Kostenlos starten →