EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Glass-Based Half-Mode SIW Bandpass Filter with Negative Coupling Structure

Chen Shi, Wenlei Li, Jihua Zhang, Zhihua Tao, Yong Li, Dongbin Wang, Shuang Li, Ting Liu

Micromachines · 06.02.2026 · 17 (2) · 219

DOI: 10.3390/mi17020219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 06.02.2026. Verfasst von Chen Shi und 7 weiteren Autor:innen. Beteiligte Einrichtung: 3D Chips (Guangdong) Technology Co., Ltd., Dongguan 523808, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Postdoctoral Fellowship Program of the China Postdoctoral Science Foundation, the Guangdong S&T Program, Postdoctoral Fellowship Program of the China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a millimeter-wave half-mode substrate integrated waveguide filter with high selectivity, using through glass via technology. Compared to a traditional printed circuit board, the benefits of high precision and integration afforded by the glass-based process enable the substrate-integrated waveguide to be employed at a higher operating frequency. A novel negative coupling structure is proposed for achieving a quasi-elliptic function response, and its coupling mechanism is investigated to explore the properties of the finite transmission zeros. The proposed coupling slots allow for flexible adjustment of the coupling between the half-mode substrate integrated waveguide cavities from positive to negative by modulating the corresponding geometrical parameters. As a prototype, a glass-based fourth-order bandpass filter is synthesized, simulated, fabricated and measured. Subsequently, good matching is captured, confirming the validity of the topology. The proposed glass-based negative coupling structure is promising for realizing substrate integrated waveguide filters with a quasi-elliptic function response, especially operating at millimeter-wave band.

Schlagwörter

Stichwörter der Autor:innen

half-mode substrate integrated waveguidemillimeter-wave filternegative couplingthrough glass viatransmission zeros

Autor:innen und Institutionen

  • 3D Chips (Guangdong) Technology Co., Ltd., Dongguan 523808, China.
  • State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 611731, China.

Förderung

  • the Postdoctoral Fellowship Program of the China Postdoctoral Science Foundation
  • the Guangdong S&T Program
  • Postdoctoral Fellowship Program of the China Postdoctoral Science Foundation
  • Guangdong S&T Program

Zitieren

APA

Shi, C., Li, W., Zhang, J., Tao, Z., Li, Y., Wang, D., Li, S., & Liu, T. (2026). Glass-Based Half-Mode SIW Bandpass Filter with Negative Coupling Structure. Micromachines, 17(2), 219. https://doi.org/10.3390/mi17020219

Vancouver

Shi C, Li W, Zhang J, Tao Z, Li Y, Wang D, et al. Glass-Based Half-Mode SIW Bandpass Filter with Negative Coupling Structure. Micromachines. 2026;17(2):219. doi:10.3390/mi17020219

BibTeX
@article{Shi2026,
  author = {Shi, Chen and Li, Wenlei and Zhang, Jihua and Tao, Zhihua and Li, Yong and Wang, Dongbin and Li, Shuang and Liu, Ting},
  title = {Glass-Based Half-Mode SIW Bandpass Filter with Negative Coupling Structure},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {219},
  doi = {10.3390/mi17020219}
}
Kostenlos starten →