EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hierarchical Porous Nickel Oxide Nanoparticles with High Specific Surface Area by Green Synthesis

Kamilya Khalugarova iD, Yulia M Spivak iD, Dmitriy A Kozodaev, Vyacheslav A Moshnikov iD, Anna A Dombrovskaya, Ekaterina K Khrapova

Micromachines · 26.01.2026 · 17 (2) · 156

DOI: 10.3390/mi17020156 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.01.2026. Verfasst von Kamilya Khalugarova und 5 weiteren Autor:innen. Beteiligte Einrichtung: Microelectronics Department, Saint Petersburg Electrotechnical University "LETI", Professora Popova St., 5, 197022 Saint Petersburg, Russia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous nickel oxide nanoparticles with a hierarchical structure and high specific surface area were obtained by green synthesis followed by thermal annealing. The influence of the choice of precursor plant extract (Fumaria officinalis L. and Origanum vulgare L.) and the extractants in aqueous solutions on the parameters of the synthesized particles was studied. Characterization of the NiO morphology and composition, as well as the specific surface area, was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and the BET method of nitrogen thermal desorption. Resulting particles have a spherical shape and a size from 30 to 50 nm. According to the data obtained, it can be seen that when the precursor is changed from Fumaria officinalis L. to Origanum vulgare L., the size of the synthesized particles increases, while the structure becomes more friable. It has been revealed that certain parameters and the nature of the assembly of porous particles lead to an increase in the surface area: the highest value of the SSA of 130.0 m2/g is observed in NiO nanoparticles obtained using Fumaria officinalis L. extract based on isopropyl alcohol. Also, a relatively high SSA value of 73.5 m2/g is observed in nanoparticles obtained using the same extractant for Origanum vulgare L. extract, while the use of an ethyl alcohol-based extractant for Fumaria officinalis L. resulted in the lowest value of 40.2 m2/g. The developed semiconductor particles are promising for use in catalysis, sensors, and as part of supercapacitor electrodes and functional layers in device structures for solar cells.

Schlagwörter

Stichwörter der Autor:innen

BETgreen synthesismorphologynanoparticlesnickel oxideporous materialsspecific surface area

Autor:innen und Institutionen

  • Microelectronics Department, Saint Petersburg Electrotechnical University "LETI", Professora Popova St., 5, 197022 Saint Petersburg, Russia.
  • NT-MDT BV, Hoenderparkweg 96 b, 7335 Apeldoorn, The Netherlands.
  • Ioffe Institute, Polytekhnicheskaya St., 26, 194021 Saint Petersburg, Russia.

ORCID-Profile: Kamilya Khalugarova, Yulia M Spivak, Vyacheslav A Moshnikov

Zitieren

APA

Khalugarova, K., Spivak, Y. M., Kozodaev, D. A., Moshnikov, V. A., Dombrovskaya, A. A., & Khrapova, E. K. (2026). Hierarchical Porous Nickel Oxide Nanoparticles with High Specific Surface Area by Green Synthesis. Micromachines, 17(2), 156. https://doi.org/10.3390/mi17020156

Vancouver

Khalugarova K, Spivak YM, Kozodaev DA, Moshnikov VA, Dombrovskaya AA, Khrapova EK. Hierarchical Porous Nickel Oxide Nanoparticles with High Specific Surface Area by Green Synthesis. Micromachines. 2026;17(2):156. doi:10.3390/mi17020156

BibTeX
@article{Khalugarova2026,
  author = {Khalugarova, Kamilya and Spivak, Yulia M and Kozodaev, Dmitriy A and Moshnikov, Vyacheslav A and Dombrovskaya, Anna A and Khrapova, Ekaterina K},
  title = {Hierarchical Porous Nickel Oxide Nanoparticles with High Specific Surface Area by Green Synthesis},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {156},
  doi = {10.3390/mi17020156}
}
Kostenlos starten →