EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal–Electrical Fusion for Real-Time Condition Monitoring of IGBT Modules in Transportation Systems

Man Cui, Yun Liu, Zhen Hu iD, Tao Shi iD

Micromachines · 25.01.2026 · 17 (2) · 154

DOI: 10.3390/mi17020154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 25.01.2026. Verfasst von Man Cui und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: he National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The operational reliability of Insulated Gate Bipolar Transistor (IGBT) modules in demanding transportation applications, such as traction systems, is critically challenged by solder layer and bond wire failures under cyclic thermal stress. To address this, this paper proposes a novel health monitoring framework that innovatively synergizes micro-scale spatial thermal analysis with microsecond electrical dynamics inversion. The method requires only non-invasive temperature measurements on the module baseplate and utilizes standard electrical signals (load current, duty cycle, switching frequency, DC-link voltage) readily available from the converter’s controller, enabling simultaneous diagnosis without dedicated voltage or high-bandwidth current sensors. First, a non-invasive assessment of solder layer fatigue is achieved by correlating the normalized thermal gradient (∇TP) on the baseplate with the underlying thermal impedance (ZJC). Second, for bond wire aging, a cost-effective inversion algorithm estimates the on-state voltage (Vce,on) by calculating the total power loss from temperature, isolating the conduction loss (Pcond) with the aid of a Foster-model-based junction temperature (TJ) estimate, and finally computing Vce,on at a unique current inflection point (IC,inf) to nullify TJ dependency. Third, the health states from both failure modes are fused for comprehensive condition evaluation. Experimental validation confirms the method’s accuracy in tracking both degradation modes. This work provides a practical and economical solution for online IGBT condition monitoring, enhancing the predictive maintenance and operational safety of transportation electrification systems.

Schlagwörter

Stichwörter der Autor:innen

IGBTscondition monitoringrail traction convertersthermal gradient analysis

Autor:innen und Institutionen

  • School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing 100081, China.
  • College of Artificial Intelligence, Nanjing University of Posts and Telecommunications, Nanjing 210023, China.

ORCID-Profile: Zhen Hu, Tao Shi

Förderung

  • he National Natural Science Foundation of China

Zitieren

APA

Cui, M., Liu, Y., Hu, Z., & Shi, T. (2026). Thermal–Electrical Fusion for Real-Time Condition Monitoring of IGBT Modules in Transportation Systems. Micromachines, 17(2), 154. https://doi.org/10.3390/mi17020154

Vancouver

Cui M, Liu Y, Hu Z, Shi T. Thermal–Electrical Fusion for Real-Time Condition Monitoring of IGBT Modules in Transportation Systems. Micromachines. 2026;17(2):154. doi:10.3390/mi17020154

BibTeX
@article{Cui2026,
  author = {Cui, Man and Liu, Yun and Hu, Zhen and Shi, Tao},
  title = {Thermal–Electrical Fusion for Real-Time Condition Monitoring of IGBT Modules in Transportation Systems},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {154},
  doi = {10.3390/mi17020154}
}
Kostenlos starten →