EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flexible Mesh-Structured Single-Walled Carbon Nanotube Thermoelectric Generators with Enhanced Heat Dissipation for Wearable Applications

Hiroto Nakayama, Takuya Amezawa, Yuta Asano, Shuya Ochiai, Keisuke Uchida, Yuto Nakazawa, Masayuki Takashiri iD

Micromachines · 22.01.2026 · 17 (1) · 139

DOI: 10.3390/mi17010139 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.01.2026. Verfasst von Hiroto Nakayama und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science, Tokai University, Hiratsuka 259-1292, Kanagawa, Japan. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermoelectric generators (TEGs) based on single-walled carbon nanotubes (SWCNTs) offer a promising approach for powering sensors in wearable systems. However, achieving high performance remains challenging because the high thermal conductivity of SWCNTs limits the temperature gradient within the device. We previously developed flexible SWCNT-TEGs with enhanced heat dissipation by dip-coating SWCNTs onto mesh sheets; however, their performance in real wearable environments had not been evaluated. In this study, we demonstrate the practical operation of these SWCNT-TEGs under conditions such as fingertip contact and cap-based wear. The output voltage increased proportionally with the number of fingers touching the device, and a stable voltage of 6.1 mV was obtained when the TEG was mounted on a cap and worn outdoors at 7 °C. These findings highlight the promising potential of flexible SWCNT-TEGs as power sources for next-generation wearable technologies, including human–computer interaction and health monitoring.

Schlagwörter

Stichwörter der Autor:innen

dip-coated single-walled carbon nanotubes (SWCNTs)heat dissipationmesh sheetsthermoelectric generatorwearable sensors

Autor:innen und Institutionen

  • Department of Materials Science, Tokai University, Hiratsuka 259-1292, Kanagawa, Japan.
  • Department of Applied Chemistry, Tokai University, Hiratsuka 259-1292, Kanagawa, Japan.

ORCID-Profile: Masayuki Takashiri

Zitieren

APA

Nakayama, H., Amezawa, T., Asano, Y., Ochiai, S., Uchida, K., Nakazawa, Y., & Takashiri, M. (2026). Flexible Mesh-Structured Single-Walled Carbon Nanotube Thermoelectric Generators with Enhanced Heat Dissipation for Wearable Applications. Micromachines, 17(1), 139. https://doi.org/10.3390/mi17010139

Vancouver

Nakayama H, Amezawa T, Asano Y, Ochiai S, Uchida K, Nakazawa Y, et al. Flexible Mesh-Structured Single-Walled Carbon Nanotube Thermoelectric Generators with Enhanced Heat Dissipation for Wearable Applications. Micromachines. 2026;17(1):139. doi:10.3390/mi17010139

BibTeX
@article{Nakayama2026,
  author = {Nakayama, Hiroto and Amezawa, Takuya and Asano, Yuta and Ochiai, Shuya and Uchida, Keisuke and Nakazawa, Yuto and Takashiri, Masayuki},
  title = {Flexible Mesh-Structured Single-Walled Carbon Nanotube Thermoelectric Generators with Enhanced Heat Dissipation for Wearable Applications},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {1},
  pages = {139},
  doi = {10.3390/mi17010139}
}
Kostenlos starten →