Tab-to-Busbar Interconnections in EV Battery Packs: An Introductory Review of Typical Welding Methods
Micromachines · 19.12.2025 · 17 (1) · 2
DOI: 10.3390/mi17010002 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 19.12.2025. Verfasst von Sooyong Choi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Intelligent Semiconductor Engineering, Chung-Ang University, Seoul 06974, Republic of Korea. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 101 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Chung-Ang University Research Scholarship Grants, Ajou University.
Abstract (Originalsprache)
This paper reviews tab-to-busbar interconnections in lithium-ion battery packs, focusing on resistance welding (RW), laser beam welding (LBW), and ultrasonic welding (USW). The functional roles of tabs and busbars and typical material choices (Al-, Cu-, and Ni-plated Cu) are outlined. Subsequently, the processes are compared in terms of heat input, interfacial metallurgy, electrical resistance, mechanical robustness, and manufacturability. USW, as a solid-state method, suppresses porosity and limits Al-Cu intermetallic growth, but is sensitive to thickness, stack geometry, and tool wear. LBW enables high-speed, automated production with precise energy delivery, yet requires careful control to mitigate spatter, porosity, and brittle IMCs in dissimilar joints. RW remains cost-effective and flexible but can suffer from electrode wear and variability with highly conductive stacks. This review also summarizes the effect of the busbar material (Al versus Cu) and thickness on the connection resistance and temperature increase under a high current. No single process is universally superior, and the selection should match the stack-up, reliability targets, and production constraints. This paper aims to provide an overview of recent and conventional research trends for each welding method and to introduce selected non-traditional approaches, thereby presenting a range of viable options for future applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Intelligent Semiconductor Engineering, Chung-Ang University, Seoul 06974, Republic of Korea.
- Graduate School of Flexible and Printable Electronics, LANL-JBNU Engineering Institute-Korea, Jeonbuk National University, Jeonju 54896, Republic of Korea.
- Department of Molecular Science and Technology, Ajou University, Suwon 16499, Republic of Korea.
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea.
ORCID-Profile: Sooman Lim
Förderung
- National Research Foundation of Korea
- Chung-Ang University Research Scholarship Grants
- Ajou University
Zitieren
APA
Choi, S., Lim, S., Shan, A., Lee, J., Yun, T. G., & Hwang, B. (2025). Tab-to-Busbar Interconnections in EV Battery Packs: An Introductory Review of Typical Welding Methods. Micromachines, 17(1), 2. https://doi.org/10.3390/mi17010002
Vancouver
Choi S, Lim S, Shan A, Lee J, Yun TG, Hwang B. Tab-to-Busbar Interconnections in EV Battery Packs: An Introductory Review of Typical Welding Methods. Micromachines. 2025;17(1):2. doi:10.3390/mi17010002
BibTeX
@article{Choi2025,
author = {Choi, Sooyong and Lim, Sooman and Shan, Ali and Lee, Jinkyu and Yun, Tae Gwang and Hwang, Byungil},
title = {Tab-to-Busbar Interconnections in EV Battery Packs: An Introductory Review of Typical Welding Methods},
journal = {Micromachines},
year = {2025},
volume = {17},
number = {1},
pages = {2},
doi = {10.3390/mi17010002}
}
EUVIMED