EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Incorporation of Temperature Impact on Hot-Carrier Degradation into Compact Physics Model

Stanislav Tyaginov iD, Erik Bury, Alexander Grill iD, Ethan Kao, An De Keersgieter, Alexander Makarov, Michiel Vandemaele iD, Alessio Spessot, Adrian Chasin, Ben Kaczer

Micromachines · 18.12.2025 · 16 (12) · 1424

DOI: 10.3390/mi16121424 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.12.2025. Verfasst von Stanislav Tyaginov und 9 weiteren Autor:innen. Beteiligte Einrichtung: IMEC, Kapeldreef 75, 3001 Leuven, Belgium. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 125 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work is supported by the Chips JU project ARCTIC, Chips JU project ARCTIC, Chips Joint Undertaking.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We extend our compact physics model (CPM) for hot-carrier degradation (HCD) to cover the impact of ambient temperature on HCD. Three components of this impact are taken into account. First, variations in temperature perturb carrier transport. Second, the thermal component of Si-H bond rupture becomes more prominent at elevated temperatures. Third, vibrational lifetime of the bond decreases with temperature. While the first and the third mechanisms impede HCD, the second one accelerates this detrimental phenomenon. The aforementioned mechanisms are consolidated in our extended CPM, which was verified against experimental data acquired from foundry quality n-channel transistors with a gate length of 28 nm. For model validation, we use experimental data recorded using four combinations of gate and drain voltages and across a broad temperature range of 150–300 K. We demonstrate that the extended CPM is capable of reproducing measured degradation ΔId,lin(t) (normalized change of the linear drain current with stress time) traces with good accuracy over a broad temperature range.

Schlagwörter

Stichwörter der Autor:innen

Si-H bondbond dissociationcompact physics modelcryo reliabilitydefect generationhot-carrier degradationinterface traps

Autor:innen und Institutionen

  • IMEC, Kapeldreef 75, 3001 Leuven, Belgium.
  • KU Leuven Belgium, 3001 Leuven, Belgium.

ORCID-Profile: Stanislav Tyaginov, Alexander Grill, Michiel Vandemaele

Förderung

  • This work is supported by the Chips JU project ARCTIC
  • Chips JU project ARCTIC
  • Chips Joint Undertaking
  • Canadian and the Swiss federal governments
  • imec’s Industrial Affiliation Program

Zitieren

APA

Tyaginov, S., Bury, E., Grill, A., Kao, E., De Keersgieter, A., Makarov, A., Vandemaele, M., Spessot, A., Chasin, A., & Kaczer, B. (2025). Incorporation of Temperature Impact on Hot-Carrier Degradation into Compact Physics Model. Micromachines, 16(12), 1424. https://doi.org/10.3390/mi16121424

Vancouver

Tyaginov S, Bury E, Grill A, Kao E, De Keersgieter A, Makarov A, et al. Incorporation of Temperature Impact on Hot-Carrier Degradation into Compact Physics Model. Micromachines. 2025;16(12):1424. doi:10.3390/mi16121424

BibTeX
@article{Tyaginov2025,
  author = {Tyaginov, Stanislav and Bury, Erik and Grill, Alexander and Kao, Ethan and De Keersgieter, An and Makarov, Alexander and Vandemaele, Michiel and Spessot, Alessio and Chasin, Adrian and Kaczer, Ben},
  title = {Incorporation of Temperature Impact on Hot-Carrier Degradation into Compact Physics Model},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {12},
  pages = {1424},
  doi = {10.3390/mi16121424}
}
Kostenlos starten →