EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multiscale Modeling of Thermo–Electro–Mechanical Coupling of BGA Solder Joints in Microelectronic Systems of Ruggedized Computers for Signal Integrity Analysis

Pan Li, Jin Huang, Jie Zhang, Hongxiao Gong, Jianjun Wang iD, Daijiang Zuo, Mengyang Su iD, Jiwei Shi

Micromachines · 18.11.2025 · 16 (11) · 1292

DOI: 10.3390/mi16111292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.11.2025. Verfasst von Pan Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, Xidian University, Xi'an 710071, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Basic Research Program of Shaanxi, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ruggedized computers are the core of modern communication, guidance, control, and data-processing systems, and typically operate under extreme environmental conditions. However, under extreme service conditions such as temperature cycling, vibration, and mechanical shock, thermo–electro–mechanical (TME) multi-physics coupling in ball grid array (BGA) solder joints is particularly significant, severely affecting system reliability and signal integrity. To comprehensively elucidate the effects of thermal, electrical, and mechanical fields on solder joints and signal transmission, this study proposes a multiscale multi-physics modeling and analysis framework for BGA solder joints in microelectronic systems of ruggedized computers, covering the computer system level, motherboard level, solder joint level, and solder interconnect level. A model correlation study under ten thermal cycling conditions demonstrated an accuracy of 88.89%, confirming the validity and applicability of the proposed model. Based on this validated framework and model, the temperature distribution, stress–strain response, and signal integrity characteristics were further analyzed under combined conditions of thermal cycling, random vibration, and mechanical shock. The results indicate that a rise in temperature in solder joints induces thermal stresses and deformations, while variations in electrical conductivity under thermal loading trigger electromigration and concentration evolution, which further couple with stress gradients to form TME multi-physics interactions. Under such coupling, critical solder balls exhibit stress concentration at the metallurgical interfaces, with a maximum von Mises stress of 191.51 MPa accompanied by plastic strain accumulation. In addition, the PCIe high-speed interconnect experienced a maximum deformation of 16.104 μm and a voltage amplitude reduction of approximately 18.51% after 928 thermal cycles, exceeding the normal operating range. This research provides a theoretical basis and engineering reference for reliability assessment and optimization design of microelectronic systems in ruggedized computers in complex service environments.

Schlagwörter

Stichwörter der Autor:innen

BGA solder jointsmultiscalesignal integrity analysisthermal–electrical–mechanical coupling modeling

Autor:innen und Institutionen

  • State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, Xidian University, Xi'an 710071, China.
  • Zhongxing Telecommunication Equipment Corporation, Xi'an 710076, China.

ORCID-Profile: Jianjun Wang, Mengyang Su

Förderung

  • National Natural Science Foundation of China
  • Natural Science Basic Research Program of Shaanxi
  • China Postdoctoral Science Foundation

Zitieren

APA

Li, P., Huang, J., Zhang, J., Gong, H., Wang, J., Zuo, D., Su, M., & Shi, J. (2025). Multiscale Modeling of Thermo–Electro–Mechanical Coupling of BGA Solder Joints in Microelectronic Systems of Ruggedized Computers for Signal Integrity Analysis. Micromachines, 16(11), 1292. https://doi.org/10.3390/mi16111292

Vancouver

Li P, Huang J, Zhang J, Gong H, Wang J, Zuo D, et al. Multiscale Modeling of Thermo–Electro–Mechanical Coupling of BGA Solder Joints in Microelectronic Systems of Ruggedized Computers for Signal Integrity Analysis. Micromachines. 2025;16(11):1292. doi:10.3390/mi16111292

BibTeX
@article{Li2025,
  author = {Li, Pan and Huang, Jin and Zhang, Jie and Gong, Hongxiao and Wang, Jianjun and Zuo, Daijiang and Su, Mengyang and Shi, Jiwei},
  title = {Multiscale Modeling of Thermo–Electro–Mechanical Coupling of BGA Solder Joints in Microelectronic Systems of Ruggedized Computers for Signal Integrity Analysis},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {11},
  pages = {1292},
  doi = {10.3390/mi16111292}
}
Kostenlos starten →