EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modular Flow Synthesis of Citric Acid-Coated Superparamagnetic Iron Oxide Nanoparticles: Preliminary Results

Sabina Vohl, Andreja Nemet, Janja Stergar iD

Micromachines · 29.10.2025 · 16 (11) · 1228

DOI: 10.3390/mi16111228 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.10.2025. Verfasst von Sabina Vohl und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova 17, SI-2000 Maribor, Slovenia. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research and Innovation Agency (ARIS).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Superparamagnetic iron oxide nanoparticles (SPIONs) with sizes below 10 nm are biocompatible and non-toxic, making them promising for biomedical applications. To prevent their agglomeration and enhance their functionality, the nanoparticles were coated with citric acid (CA), which modifies the surface charge, improves dispersion stability, and facilitates biomedical use. In this work, a modular flow-through microreactor system was employed to synthesize and coat the nanoparticles in a single, continuous two-step process. The system enables precise control over temperature and mixing, ensuring uniform reaction conditions and minimizing hot spots. The synthesized Fe3O4 nanoparticles exhibited an average crystallite size of ~5 nm (XRD) and particle sizes of 4–6 nm (TEM). FTIR analysis confirmed the successful surface functionalization with CA, while TGA indicated a coating mass fraction of approximately 4–20 wt%, increasing with higher CA concentration. Zeta potential measurements revealed strong colloidal stability, with values around −35 mV at pH 6.5. Among the tested CA concentrations, the sample with a molar ratio of Fe3O4:CA = 1:0.25 exhibited the most favorable properties, including narrow size distribution and improved dispersion stability. These findings demonstrate that the continuous modular flow approach enables the reproducible synthesis of highly stable, sub-10 nm CA-coated SPIONs, offering promising potential for biomedical applications, particularly as magnetic resonance imaging (MRI) contrast agents.

Schlagwörter

Stichwörter der Autor:innen

citric acidcontinuous synthesismodular flow microreactor systemsuperparamagnetic iron oxide nanoparticleszeta potential measurements

Autor:innen und Institutionen

  • Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova 17, SI-2000 Maribor, Slovenia.

ORCID-Profile: Janja Stergar

Förderung

  • Slovenian Research and Innovation Agency (ARIS)

Zitieren

APA

Vohl, S., Nemet, A., & Stergar, J. (2025). Modular Flow Synthesis of Citric Acid-Coated Superparamagnetic Iron Oxide Nanoparticles: Preliminary Results. Micromachines, 16(11), 1228. https://doi.org/10.3390/mi16111228

Vancouver

Vohl S, Nemet A, Stergar J. Modular Flow Synthesis of Citric Acid-Coated Superparamagnetic Iron Oxide Nanoparticles: Preliminary Results. Micromachines. 2025;16(11):1228. doi:10.3390/mi16111228

BibTeX
@article{Vohl2025,
  author = {Vohl, Sabina and Nemet, Andreja and Stergar, Janja},
  title = {Modular Flow Synthesis of Citric Acid-Coated Superparamagnetic Iron Oxide Nanoparticles: Preliminary Results},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {11},
  pages = {1228},
  doi = {10.3390/mi16111228}
}
Kostenlos starten →