Effect of Geometric Design on the Mechanical Performance of Digital Light Processing (DLP)-Printed Microneedles
Micromachines · 27.10.2025 · 16 (11) · 1221
DOI: 10.3390/mi16111221 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 27.10.2025. Verfasst von Tuba Bedir und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Nanotechnology and Biomaterials Application and Research (NBUAM), Marmara University, 34854 Istanbul, Turkey. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Turkey, TUBITAK.
Abstract (Originalsprache)
This study describes the processing of microneedle (MN) arrays with three different heights of arrowhead (600 µm (A1), 800 µm (A2), and 1000 µm (A3)), pyramid (600 µm (P1), 800 µm (P2), and 1000 µm (P3)), and turret (600 µm (T1), 800 µm (T2), and 1000 µm (T3)) designs using a digital light processing (DLP)-based 3D printing method. The 3D-printed MNs were examined for their morphological characteristics and mechanical performance. Scanning electron microscopy (SEM) imaging confirmed that all of the MNs were fabricated without fracture or bending. Each design exhibited distinct structural characteristics: arrowhead MNs displayed a well-defined morphology with sharp tips, pyramid MNs showed slight layering, and turret MNs, characterized by a wider base and sharp tips, had a smoother surface compared to the other designs. Mechanical tests revealed that the arrowhead MNs carried less load and were more prone to bending, while the pyramid and turret designs provided higher mechanical stability and penetration capacity. The pyramid design (P3) showed the highest mechanical strength, while turret MNs offered a more stable performance despite lower penetration capacity. These findings highlight the critical role of geometric design in optimizing MN performance for effective transdermal drug delivery.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Nanotechnology and Biomaterials Application and Research (NBUAM), Marmara University, 34854 Istanbul, Turkey.
- Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695, USA.
- Joint Department of Biomedical Engineering, University of North Carolina, Chapel Hill, NC 27599, USA.
- Department of Metallurgical and Materials Engineering, Faculty of Technology, Marmara University, 34854 Istanbul, Turkey.
ORCID-Profile: Tuba Bedir, Siba Sundar Sahoo, Oguzhan Gunduz, Roger Narayan
Förderung
- Scientific and Technological Research Council of Turkey
- TUBITAK
Zitieren
APA
Bedir, T., Sahoo, S. S., Kadian, S., Gunduz, O., & Narayan, R. (2025). Effect of Geometric Design on the Mechanical Performance of Digital Light Processing (DLP)-Printed Microneedles. Micromachines, 16(11), 1221. https://doi.org/10.3390/mi16111221
Vancouver
Bedir T, Sahoo SS, Kadian S, Gunduz O, Narayan R. Effect of Geometric Design on the Mechanical Performance of Digital Light Processing (DLP)-Printed Microneedles. Micromachines. 2025;16(11):1221. doi:10.3390/mi16111221
BibTeX
@article{Bedir2025,
author = {Bedir, Tuba and Sahoo, Siba Sundar and Kadian, Sachin and Gunduz, Oguzhan and Narayan, Roger},
title = {Effect of Geometric Design on the Mechanical Performance of Digital Light Processing (DLP)-Printed Microneedles},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {11},
pages = {1221},
doi = {10.3390/mi16111221}
}
EUVIMED