EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Stability and Functionality of Coil and Piezoelectric Braille Modules Under Varying Temperature Conditions

Krzysztof Zbroja, Anna Drabczyk iD, Oliwier Sobesto, Dominik Wojcieszczak, Mariusz Filipiec, Grzegorz Sapeta, Marcin Ostrowski, Patryk Kasza iD, Robert P Socha iD

Micromachines · 29.09.2025 · 16 (10) · 1112

DOI: 10.3390/mi16101112 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.09.2025. Verfasst von Krzysztof Zbroja und 8 weiteren Autor:innen. Beteiligte Einrichtung: CBRTP SA Research and Development Center of Technology for Industry, Zygmunta Modzelewskiego 77 St., 02-679 Warszawa, Poland. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Centre for Research and Development, Poland (NCBiR).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the performance and reliability of two different types of Braille modules, i.e., coil and piezoelectric, under varying temperature conditions were compared. The coil module works on the principle of electromagnetic forces generated by coils, while the piezoelectric module is based on the deformation of piezoelectric materials under electric voltage to move needles. The main purpose of this research was to discuss the stability and functionality of both modules within the temperature range from −30 °C to +50 °C. One thousand cycles of operation were conducted for each temperature step in 5 °C increments, focusing on the correctness of needle movement and system reliability. The results demonstrated that the piezoelectric module exhibited stable operation over the entire temperature range, while the coil module showed instabilities, such as self-jamming and overheating, above 20 °C. These problems were probably due to thermal expansion and reduced lubrication efficiency. These results underscore the piezoelectric module’s improved adaptation to high-temperature operation, making it a promising solution for applications requiring reliable operation under varying conditions.

Schlagwörter

Stichwörter der Autor:innen

Braille moduleelectromagnetic coilpiezoelectric actuatortemperature stability

Autor:innen und Institutionen

  • CBRTP SA Research and Development Center of Technology for Industry, Zygmunta Modzelewskiego 77 St., 02-679 Warszawa, Poland.
  • Department of Robotics and Mechatronics, AGH University of Krakow, Reymonta 13a St., 30-059 Kraków, Poland.

ORCID-Profile: Anna Drabczyk, Patryk Kasza, Robert P Socha

Förderung

  • The National Centre for Research and Development, Poland (NCBiR)

Zitieren

APA

Zbroja, K., Drabczyk, A., Sobesto, O., Wojcieszczak, D., Filipiec, M., Sapeta, G., Ostrowski, M., Kasza, P., & Socha, R. P. (2025). Analysis of Stability and Functionality of Coil and Piezoelectric Braille Modules Under Varying Temperature Conditions. Micromachines, 16(10), 1112. https://doi.org/10.3390/mi16101112

Vancouver

Zbroja K, Drabczyk A, Sobesto O, Wojcieszczak D, Filipiec M, Sapeta G, et al. Analysis of Stability and Functionality of Coil and Piezoelectric Braille Modules Under Varying Temperature Conditions. Micromachines. 2025;16(10):1112. doi:10.3390/mi16101112

BibTeX
@article{Zbroja2025,
  author = {Zbroja, Krzysztof and Drabczyk, Anna and Sobesto, Oliwier and Wojcieszczak, Dominik and Filipiec, Mariusz and Sapeta, Grzegorz and Ostrowski, Marcin and Kasza, Patryk and Socha, Robert P},
  title = {Analysis of Stability and Functionality of Coil and Piezoelectric Braille Modules Under Varying Temperature Conditions},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {10},
  pages = {1112},
  doi = {10.3390/mi16101112}
}
Kostenlos starten →