EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Power-Law Reliability Plotting for Microelectronics

Joseph B Bernstein iD

Micromachines · 16.09.2025 · 16 (9) · 1055

DOI: 10.3390/mi16091055 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.09.2025. Verfasst von Joseph B Bernstein. Beteiligte Einrichtung: Department of Electrical and Electronic Engineering, Ariel University, Ariel 40700, Israel. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 9 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Navy, United States Office of Naval Research (ONR).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The power-law time plotting for reliability prediction needs to be reexamined. Until now, most degradation plots in microelectronics reliability analysis assume that the data follow a power-law change in time. The plot is the change in a measured parameter versus the log of time, based on the principle that one can calculate exactly the initial indicator value, S0, and from that, extrapolate any change in that parameter, ΔS(t), as a power-law with time, t1/m. The normalized change, ΔS(t)/S0, relies heavily on a precise value for S0 such that the calculated power-law exponent, m, may be exaggerated such that extrapolated time-to-fail calculations will be optimistic, even by many orders of magnitude. Also, the extrapolated lifetime may be pessimistic, also by orders of magnitude in time. We show that by transforming the x-axis as the time to a power of 1/m, choosing m by setting the second order of a polynomial curve fit to zero, a more accurate prediction can be achieved with a realistic time to fail given the accelerated testing conditions. We also show how to determine what the correct power of time is using a linear fit to a second-order polynomial. The plotting principles presented here are independent of any physics, rather an empirical focus on how to plot the data according to a power-law in time assumption.

Schlagwörter

Stichwörter der Autor:innen

TTFextrapolationplottingpower-lawtime domaintime to fail

Autor:innen und Institutionen

  • Department of Electrical and Electronic Engineering, Ariel University, Ariel 40700, Israel.

ORCID-Profile: Joseph B Bernstein

Förderung

  • United States Navy
  • United States Office of Naval Research (ONR)

Zitieren

APA

Bernstein, J. B. (2025). Power-Law Reliability Plotting for Microelectronics. Micromachines, 16(9), 1055. https://doi.org/10.3390/mi16091055

Vancouver

Bernstein JB. Power-Law Reliability Plotting for Microelectronics. Micromachines. 2025;16(9):1055. doi:10.3390/mi16091055

BibTeX
@article{Bernstein2025,
  author = {Bernstein, Joseph B},
  title = {Power-Law Reliability Plotting for Microelectronics},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {9},
  pages = {1055},
  doi = {10.3390/mi16091055}
}
Kostenlos starten →