Design and Fabrication of Embedded Microchannel Cooling Solutions for High-Power-Density Semiconductor Devices
Micromachines · 04.08.2025 · 16 (8) · 908
DOI: 10.3390/mi16080908 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 04.08.2025. Verfasst von Yu Fu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Microelectronics, Xidian University, Xi'an 710126, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, the Science Fund for Creative Research Groups of the National Natural Science Foundation of China, the State Key Program of National Natural Science of China.
Abstract (Originalsprache)
The rapid development of high-power-density semiconductor devices has rendered conventional thermal management techniques inadequate for handling their extreme heat fluxes. This manuscript presents and implements an embedded microchannel cooling solution for such devices. By directly integrating micropillar arrays within the near-junction region of the substrate, efficient forced convection and flow boiling mechanisms are achieved. Finite element analysis was first employed to conduct thermo–fluid–structure simulations of micropillar arrays with different geometries. Subsequently, based on our simulation results, a complete multilayer microstructure fabrication process was developed and integrated, including critical steps such as deep reactive ion etching (DRIE), surface hydrophilic/hydrophobic functionalization, and gold–stannum (Au-Sn) eutectic bonding. Finally, an experimental test platform was established to systematically evaluate the thermal performance of the fabricated devices under heat fluxes of up to 1200 W/cm2. Our experimental results demonstrate that this solution effectively maintains the device operating temperature at 46.7 °C, achieving a mere 27.9 K temperature rise and exhibiting exceptional thermal management capabilities. This manuscript provides a feasible, efficient technical pathway for addressing extreme heat dissipation challenges in next-generation electronic devices, while offering notable references in structural design, micro/nanofabrication, and experimental validation for related fields.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Microelectronics, Xidian University, Xi'an 710126, China.
- China Aerospace Institute of Standardization, Beijing 100071, China.
- National Innovation Institute of Defense Technology, Academy of Military Sciences, Beijing 100071, China.
- The 12th Research Institute of China Electronics Technology Group Corporation, Beijing 100071, China.
ORCID-Profile: Yu Fu, Guangbao Shan, Yintang Yang
Förderung
- the National Key Research and Development Program of China
- the Science Fund for Creative Research Groups of the National Natural Science Foundation of China
- the State Key Program of National Natural Science of China
- National Key Research and Development Program of China
- Science Fund for Creative Research Groups of the National Natural Science Foundation of China
- State Key Program of National Natural Science of China
Zitieren
APA
Fu, Y., Shan, G., Zhang, X., Zhao, L., & Yang, Y. (2025). Design and Fabrication of Embedded Microchannel Cooling Solutions for High-Power-Density Semiconductor Devices. Micromachines, 16(8), 908. https://doi.org/10.3390/mi16080908
Vancouver
Fu Y, Shan G, Zhang X, Zhao L, Yang Y. Design and Fabrication of Embedded Microchannel Cooling Solutions for High-Power-Density Semiconductor Devices. Micromachines. 2025;16(8):908. doi:10.3390/mi16080908
BibTeX
@article{Fu2025,
author = {Fu, Yu and Shan, Guangbao and Zhang, Xiaofei and Zhao, Lizheng and Yang, Yintang},
title = {Design and Fabrication of Embedded Microchannel Cooling Solutions for High-Power-Density Semiconductor Devices},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {8},
pages = {908},
doi = {10.3390/mi16080908}
}
EUVIMED