EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Temperature Wear Properties of Laser Powder Directed Energy Deposited Ferritic Stainless Steel 430

Samsub Byun, Hyun-Ki Kang iD, Jongyeob Lee, Namhyun Kang iD, Seunghun Lee

Micromachines · 26.06.2025 · 16 (7) · 752

DOI: 10.3390/mi16070752 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.06.2025. Verfasst von Samsub Byun und 4 weiteren Autor:innen. Beteiligte Einrichtung: R&D Center, Turbo Power Tech, #107 Dasan-ro, Saha-gu, Busan 49488, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SME Innovation Technology Development Project from the Ministry of Small and Medium-sized Enterprises and Startups, Korea., grant number, SME Innovation Technology Development Project from the Ministry of Small and Medium-sized Enterprises and Startups, Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ferritic stainless steels (FSSs) have attracted considerable attention due to their excellent corrosion resistance and significantly lower cost compared with nickel-bearing austenitic stainless steels. However, the high-temperature wear behavior of additively manufactured FSS 430 has not yet been thoroughly investigated. This study aims to examine the microstructural characteristics and wear properties of laser powder directed energy deposition (LP-DED) FSS 430 fabricated under varying laser powers and hatch distances. Wear testing was conducted at 25 °C and 300 °C after subjecting the samples to solution heat treating at 815 °C and 980 °C for 1 h, followed by forced fan cooling. For comparison, an AISI 430 commercial plate was also tested under the same test conditions. The microstructural evolution and worn surfaces were analyzed using SEM-EDS and EBSD techniques. The wear performance was evaluated based on the friction coefficients and cross-sectional profiles of wear tracks, including wear volume, maximum depth, and scar width. The average friction coefficients (AFCs) of the samples solution heat treated at 980 °C were higher than those treated at 815 °C. Additionally, the AFCs increased with hatch distance at both testing temperatures. A strong correlation was observed between Rockwell hardness and wear resistance, indicating that higher hardness generally results in improved wear performance.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingchrome carbide precipitationdirected energy depositionferritic stainless steel 430high-temperature tribologywear resistance

Autor:innen und Institutionen

  • R&D Center, Turbo Power Tech, #107 Dasan-ro, Saha-gu, Busan 49488, Republic of Korea.
  • Department of Materials Science and Engineering, Pusan National University, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea.
  • Welding & Joining Development Team, TESONE Co., Ltd., #37 Nakdong-daero 550beon-gil, Saha-gu, Busan 49315, Republic of Korea.

ORCID-Profile: Hyun-Ki Kang, Namhyun Kang

Förderung

  • SME Innovation Technology Development Project from the Ministry of Small and Medium-sized Enterprises and Startups, Korea., grant number
  • SME Innovation Technology Development Project from the Ministry of Small and Medium-sized Enterprises and Startups, Korea

Zitieren

APA

Byun, S., Kang, H. K., Lee, J., Kang, N., & Lee, S. (2025). High-Temperature Wear Properties of Laser Powder Directed Energy Deposited Ferritic Stainless Steel 430. Micromachines, 16(7), 752. https://doi.org/10.3390/mi16070752

Vancouver

Byun S, Kang HK, Lee J, Kang N, Lee S. High-Temperature Wear Properties of Laser Powder Directed Energy Deposited Ferritic Stainless Steel 430. Micromachines. 2025;16(7):752. doi:10.3390/mi16070752

BibTeX
@article{Byun2025,
  author = {Byun, Samsub and Kang, Hyun-Ki and Lee, Jongyeob and Kang, Namhyun and Lee, Seunghun},
  title = {High-Temperature Wear Properties of Laser Powder Directed Energy Deposited Ferritic Stainless Steel 430},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {7},
  pages = {752},
  doi = {10.3390/mi16070752}
}
Kostenlos starten →