EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of Al2O3 Nano-Powder-Mixed Dielectric in EDM-Assisted Micro-Milling

Sharad Yadav iD, Deepak Agarwal iD, Anuj Kumar Sharma iD, Rabesh Kumar Singh iD, Saurabh Chauhan, Shalini Mohanty iD

Micromachines · 21.06.2025 · 16 (7) · 725

DOI: 10.3390/mi16070725 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 21.06.2025. Verfasst von Sharad Yadav und 5 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Advanced Studies, Dr. A.P.J. Abdul Kalam Technical University, Lucknow 226031, Uttar Pradesh, India. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the use of Al2O3 nano-powder-stirred micro-EDM process for generating micro-channels. This study focuses on the effect of critical machining process parameters, such as capacitance levels and nano-powder concentration, on the micro-channel fabrication performance in terms of TWR, MRR, depth, and width. A two-stage nested ANOVA is employed to understand the effect of powder concentration within different capacitance levels. The results show that the powder concentration significantly influences the system’s performance in conjunction with the capacitance. At low (100 pF) and high (1000 pF) capacitance, the addition of Al2O3 nano-powder increases the MRR, depth, and width but decreases TWR up to a concentration of 1.0 g/L. A desirability function analysis (DFA) tool identified the best overall performance from 14 experiments, revealing that 100 pF and 1 g/L yield the optimal outcomes.

Schlagwörter

Stichwörter der Autor:innen

DFAaluminamicro-EDMmicro-channelmicro-millingpowder-mixed μ-EDM

Autor:innen und Institutionen

  • Centre for Advanced Studies, Dr. A.P.J. Abdul Kalam Technical University, Lucknow 226031, Uttar Pradesh, India.
  • Department of Mechanical Engineering, IET, Dr. Ram Manohar Lohia Avadh University, Ayodhya 224001, Uttar Pradesh, India.
  • Mechanical Engineering Department, Madan Mohan Malaviya University of Technology, Gorakhpur 273010, Uttar Pradesh, India.
  • Applied Science and Humanities, Rajkiya Engineering College, Kannauj 209732, Uttar Pradesh, India.
  • Faculty of Engineering and Sciences, University of Greenwich, Chatham Maritime ME4 4TB, UK.

ORCID-Profile: Sharad Yadav, Deepak Agarwal, Anuj Kumar Sharma, Rabesh Kumar Singh, Shalini Mohanty

Zitieren

APA

Yadav, S., Agarwal, D., Sharma, A. K., Singh, R. K., Chauhan, S., & Mohanty, S. (2025). Experimental Investigation of Al2O3 Nano-Powder-Mixed Dielectric in EDM-Assisted Micro-Milling. Micromachines, 16(7), 725. https://doi.org/10.3390/mi16070725

Vancouver

Yadav S, Agarwal D, Sharma AK, Singh RK, Chauhan S, Mohanty S. Experimental Investigation of Al2O3 Nano-Powder-Mixed Dielectric in EDM-Assisted Micro-Milling. Micromachines. 2025;16(7):725. doi:10.3390/mi16070725

BibTeX
@article{Yadav2025,
  author = {Yadav, Sharad and Agarwal, Deepak and Sharma, Anuj Kumar and Singh, Rabesh Kumar and Chauhan, Saurabh and Mohanty, Shalini},
  title = {Experimental Investigation of Al2O3 Nano-Powder-Mixed Dielectric in EDM-Assisted Micro-Milling},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {7},
  pages = {725},
  doi = {10.3390/mi16070725}
}
Kostenlos starten →