EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Roll-to-Roll (R2R) High-Throughput Manufacturing of Foil-Based Microfluidic Chips for Neurite Outgrowth Studies

Nihan Atak iD, Martin Smolka iD, Anja Haase iD, Alexandra Lorenz iD, Silvia Schobesberger iD, Stephan Ruttloff iD, Christian Wolf, Ana Ayerdi-Izquierdo iD, Peter Ertl, Nerea Briz Iceta iD, Jan Hesse iD, Martin Frauenlob iD

Micromachines · 16.06.2025 · 16 (6) · 713

DOI: 10.3390/mi16060713 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.06.2025. Verfasst von Nihan Atak und 11 weiteren Autor:innen. Beteiligte Einrichtung: Joanneum Research Forschungsgesellschaft mbH-MATERIALS, Franz-Pichler-Strasse 31, 8160 Weiz, Austria. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, European Union’s HORIZON 2020 research and innovation program, TU Wien.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microfluidic devices have emerged as a pivotal in vitro technology for axon outgrowth studies, facilitating the separation of the cell body from the neurites by geometric constraints. However, traditional microfabrication techniques fall short in terms of scalability for large-scale production, hindering widespread application. This study presents the development of foil-based cell culture chips, made of polyethylene terephthalate and in-house formulated ultraviolet curable liquid resin by high-throughput roll-to-roll (R2R) manufacturing. Here, two microchannel designs were tested to optimize manufacturing quality and assess the neurite outgrowth behavior. The fabricated neuron-foil chips demonstrated biocompatibility and supported neurite outgrowth within microchannels under static cell culture conditions. Furthermore, fluidic flow, oriented either perpendicular or parallel to the microchannel direction, was applied to enhance the biological reproducibility within the neuron-foil chips. These findings suggest that R2R manufacturing offers a promising approach for the high-throughput production of biocompatible microfluidic devices, advancing their potential application in modeling neurological diseases within the biomedical industry.

Schlagwörter

Stichwörter der Autor:innen

brain-on-a-chipfoil-based microfluidicsneurite outgrowthroll-to-roll manufacturing

Autor:innen und Institutionen

  • Joanneum Research Forschungsgesellschaft mbH-MATERIALS, Franz-Pichler-Strasse 31, 8160 Weiz, Austria.
  • Faculty of Technical Chemistry, TU Wien, Getreidemarkt 9, 1060 Vienna, Austria.
  • TECNALIA, Basque Research and Technology Alliance (BRTA), Mikeletegi Pasealekua 2, 20009 Donostia-San Sebastián, Spain.

ORCID-Profile: Nihan Atak, Martin Smolka, Anja Haase, Alexandra Lorenz, Silvia Schobesberger, Stephan Ruttloff, Ana Ayerdi-Izquierdo, Nerea Briz Iceta, Jan Hesse, Martin Frauenlob

Förderung

  • European Union
  • European Union’s HORIZON 2020 research and innovation program
  • TU Wien

Zitieren

APA

Atak, N., Smolka, M., Haase, A., Lorenz, A., Schobesberger, S., Ruttloff, S., Wolf, C., Ayerdi-Izquierdo, A., Ertl, P., Briz Iceta, N., Hesse, J., & Frauenlob, M. (2025). Roll-to-Roll (R2R) High-Throughput Manufacturing of Foil-Based Microfluidic Chips for Neurite Outgrowth Studies. Micromachines, 16(6), 713. https://doi.org/10.3390/mi16060713

Vancouver

Atak N, Smolka M, Haase A, Lorenz A, Schobesberger S, Ruttloff S, et al. Roll-to-Roll (R2R) High-Throughput Manufacturing of Foil-Based Microfluidic Chips for Neurite Outgrowth Studies. Micromachines. 2025;16(6):713. doi:10.3390/mi16060713

BibTeX
@article{Atak2025,
  author = {Atak, Nihan and Smolka, Martin and Haase, Anja and Lorenz, Alexandra and Schobesberger, Silvia and Ruttloff, Stephan and Wolf, Christian and Ayerdi-Izquierdo, Ana and Ertl, Peter and Briz Iceta, Nerea and Hesse, Jan and Frauenlob, Martin},
  title = {Roll-to-Roll (R2R) High-Throughput Manufacturing of Foil-Based Microfluidic Chips for Neurite Outgrowth Studies},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {6},
  pages = {713},
  doi = {10.3390/mi16060713}
}
Kostenlos starten →