Influence of Homoepitaxial Layer Thickness on Flatness and Chemical Mechanical Planarization Induced Scratches of 4H-Silicon Carbide Epi-Wafers
Micromachines · 13.06.2025 · 16 (6) · 710
DOI: 10.3390/mi16060710 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 13.06.2025. Verfasst von Chi-Hsiang Hsieh und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Photonics, Institute of Electro-Optical Engineering, College of Electrical and Computer Engineering, National Yang Ming Chiao Tung Univ…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The integration of thick homoepitaxial layers on silicon carbide (SiC) substrates is critical for enabling high-voltage power devices, yet it remains challenged by substrate surface quality and wafer geometry evolution. This study investigates the relationship between substrate preparation—particularly chemical mechanical planarization (CMP)—and the impact on wafer bow, total thickness variation (TTV), local thickness variation (LTV), and defect propagation during epitaxial growth. Seven 150 mm, 4° off-axis, prime-grade 4H-SiC substrates from a single ingot were processed under high-volume manufacturing (HVM) conditions and grown with epitaxial layers ranging from 12 μm to 100 μm. Metrology revealed a strong correlation between increasing epitaxial thickness and geometric deformation, especially beyond 31 μm. Despite initial surface scratches from CMP, hydrogen etching and buffer layer deposition significantly mitigated scratch propagation, as confirmed through defect mapping and SEM/FIB analysis. These findings provide a deeper understanding of the substrate-to-epitaxy integration process and offer pathways to improve manufacturability and yield in thick-epilayer SiC device fabrication.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Photonics, Institute of Electro-Optical Engineering, College of Electrical and Computer Engineering, National Yang Ming Chiao Tung University, Hsinchu 300093, Taiwan.
- Wafer Technology Division, HuaHsu Silicon Materials Corporation, Taichung 407019, Taiwan.
- Semiconductor Research Center, Hon Hai Research Institute, Taipei 114699, Taiwan.
- Academy of Innovative Semiconductor and Sustainable Manufacturing, National Cheng Kung University, Tainan 701401, Taiwan.
- Department of Electrical Engineering, National Central University, Taoyuan 320317, Taiwan.
- Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei 106335, Taiwan.
ORCID-Profile: Hao-Chung Kuo
Zitieren
APA
Hsieh, C. H., Cheng, C. Y., Hsiao, Y. K., Wang, Z. H., Tu, C. C., Chen, C. A., Lee, P. T., & Kuo, H. C. (2025). Influence of Homoepitaxial Layer Thickness on Flatness and Chemical Mechanical Planarization Induced Scratches of 4H-Silicon Carbide Epi-Wafers. Micromachines, 16(6), 710. https://doi.org/10.3390/mi16060710
Vancouver
Hsieh CH, Cheng CY, Hsiao YK, Wang ZH, Tu CC, Chen CA, et al. Influence of Homoepitaxial Layer Thickness on Flatness and Chemical Mechanical Planarization Induced Scratches of 4H-Silicon Carbide Epi-Wafers. Micromachines. 2025;16(6):710. doi:10.3390/mi16060710
BibTeX
@article{Hsieh2025,
author = {Hsieh, Chi-Hsiang and Cheng, Chiao-Yang and Hsiao, Yi-Kai and Wang, Zi-Hao and Tu, Chang-Ching and Chen, Chao-Chang Arthur and Lee, Po-Tsung and Kuo, Hao-Chung},
title = {Influence of Homoepitaxial Layer Thickness on Flatness and Chemical Mechanical Planarization Induced Scratches of 4H-Silicon Carbide Epi-Wafers},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {6},
pages = {710},
doi = {10.3390/mi16060710}
}
EUVIMED