Additive–Subtractive Manufacturing Based on Water-Soluble Sacrificial Layer: High-Adhesion Metal Patterning via Inkjet Printing
Micromachines · 13.06.2025 · 16 (6) · 706
DOI: 10.3390/mi16060706 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 13.06.2025. Verfasst von Mengyang Su und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, Xidian University, Xi'an 710071, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Basic Research Program of Shaanxi, Aeronautical Science Foundation of China.
Abstract (Originalsprache)
Inkjet printing has become a primary technique for manufacturing flexible and conformal electronics due to its digital control, design flexibility, and material compatibility. However, its direct deposition nature results in weak adhesion between metal films and substrates, as it mainly relies on van der Waals or capillary forces, which severely limits its broader application in these fields. To address this limitation, we proposed an additive–subtractive manufacturing method based on a water-soluble sacrificial layer. First, the sacrificial material is inkjet-printed onto the substrate. Then, ion sputtering is employed to bombard the surface with high-energy ions, enabling metal atoms to embed into the substrate and form a strongly adhered conductive layer. Finally, the substrate is immersed in water, dissolving the sacrificial layer and detaching the undesired metal, thereby achieving selective retention of the conductive pattern. Experimental results demonstrate that the optimized water-soluble material, with tailored viscosity and surface tension, enables a patterning resolution of ±10 μm. The adhesion strength of the sputtered metal layer is 5.2 times greater than that of inkjet-printed silver nanoparticles. This method was further applied to fabricate conductive patterns on a curved surface with a 91 mm radius confirming its feasibility and adaptability for complex 3D surfaces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, Xidian University, Xi'an 710071, China.
ORCID-Profile: Jianjun Wang
Förderung
- National Natural Science Foundation of China
- Natural Science Basic Research Program of Shaanxi
- Aeronautical Science Foundation of China
- General Program of National Natural Science Foundation of China
- Xidian-UTAR China Malaysia Science and Technology Innovation Fund
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Su, M., Huang, J., Gong, H., Zhu, Z., Li, P., Wang, H., Zhao, P., Wang, J., & Zhang, J. (2025). Additive–Subtractive Manufacturing Based on Water-Soluble Sacrificial Layer: High-Adhesion Metal Patterning via Inkjet Printing. Micromachines, 16(6), 706. https://doi.org/10.3390/mi16060706
Vancouver
Su M, Huang J, Gong H, Zhu Z, Li P, Wang H, et al. Additive–Subtractive Manufacturing Based on Water-Soluble Sacrificial Layer: High-Adhesion Metal Patterning via Inkjet Printing. Micromachines. 2025;16(6):706. doi:10.3390/mi16060706
BibTeX
@article{Su2025,
author = {Su, Mengyang and Huang, Jin and Gong, Hongxiao and Zhu, Zihan and Li, Pan and Wang, Huagui and Zhao, Pengbing and Wang, Jianjun and Zhang, Jie},
title = {Additive–Subtractive Manufacturing Based on Water-Soluble Sacrificial Layer: High-Adhesion Metal Patterning via Inkjet Printing},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {6},
pages = {706},
doi = {10.3390/mi16060706}
}
EUVIMED