EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Review of Directed Self-Assembly Material, Processing, and Application in Advanced Lithography and Patterning

Xiuyan Cheng, Di Liang, Miao Jiang, Yufei Sha, Xiaonan Liu, Jinlai Liu, Qingchen Cao, Jiangliu Shi

Micromachines · 31.05.2025 · 16 (6) · 667

DOI: 10.3390/mi16060667 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 31.05.2025. Verfasst von Xiuyan Cheng und 7 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Superstring Academy of Memory Technology, Beijing 100176, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Directed self-assembly (DSA) lithography, a cutting-edge technology based on the self-assembly of block copolymers (BCPs), has received significant attention in recent years. Combining DSA with established lithography technologies, such as extreme ultraviolet (EUV), deep ultraviolet (DUV), electron beam lithography, and nanoimprint lithography, significantly enhances the resolution of target patterns and device density. Currently, there are two commonly used methods in DSA: graphoepitaxy, employing lithographically defined topographic templates to guide BCP assembly, and chemoepitaxy, utilizing chemically patterned surfaces with precisely controlled interfacial energies to direct nanoscale phase segregation. Through novel DSA lithography technology, nanoscale patterns with smaller feature sizes and higher densities can be obtained, realizing the miniaturization of hole and line patterns and pitch multiplication and improving the roughness and local critical dimension uniformity (LCDU). It is gradually becoming one of the most promising and advanced lithography techniques. DSA lithography technology has been applied in logic, memory, and optoelectronic device fabrications.

Schlagwörter

Stichwörter der Autor:innen

BCPsDSAadvanced lithography technology

Autor:innen und Institutionen

  • Beijing Superstring Academy of Memory Technology, Beijing 100176, China.

Zitieren

APA

Cheng, X., Liang, D., Jiang, M., Sha, Y., Liu, X., Liu, J., Cao, Q., & Shi, J. (2025). Review of Directed Self-Assembly Material, Processing, and Application in Advanced Lithography and Patterning. Micromachines, 16(6), 667. https://doi.org/10.3390/mi16060667

Vancouver

Cheng X, Liang D, Jiang M, Sha Y, Liu X, Liu J, et al. Review of Directed Self-Assembly Material, Processing, and Application in Advanced Lithography and Patterning. Micromachines. 2025;16(6):667. doi:10.3390/mi16060667

BibTeX
@article{Cheng2025,
  author = {Cheng, Xiuyan and Liang, Di and Jiang, Miao and Sha, Yufei and Liu, Xiaonan and Liu, Jinlai and Cao, Qingchen and Shi, Jiangliu},
  title = {Review of Directed Self-Assembly Material, Processing, and Application in Advanced Lithography and Patterning},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {6},
  pages = {667},
  doi = {10.3390/mi16060667}
}
Kostenlos starten →