Fabrication of Large-Aspect-Ratio Micro Tool Electrodes by Bipolar Pulsed Vertical Liquid Membrane Method
Micromachines · 28.05.2025 · 16 (6) · 636
DOI: 10.3390/mi16060636 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.05.2025. Verfasst von Xiujuan Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Engineering Research Centre for Industrial Sensing and Intelligent Manufacturing Equipment of Jiangsu Province, Natural Science Foundation of Jiangsu Province.
Abstract (Originalsprache)
To achieve efficient preparation of microfine tool electrodes with a large aspect ratio, a bipolar pulse vertical liquid membrane electrochemical etching technique was proposed. The difference in current density distribution on the surface of tungsten rods under single-ended and double-ended vertical liquid membrane methods was analyzed using COMSOL software. The effects of negative voltage and pulse width on the distribution of electrolytic products and electrode preparation were investigated. It was found that when a large number of hydrogen bubbles were generated on the surface of the electrode, the electrode lost the protection of the diffusion layer, and the length was drastically shortened. When the pulse width was large, the electrode surface was covered with a coating layer of insoluble electrolysis product, and the shortening of electrode length was suppressed. Subsequently, the effects of forward voltage and bias on electrode preparation were investigated for large pulse widths. The optimal parameters are as follows: electrolyte concentration of 0.5 M, forward voltage of 4 V, negative voltage of −2 V, pulse period of 50 microseconds, and pulse width of 40 microseconds. Finally, the tool electrode with an average diameter of about 23.8 μm and an aspect ratio of 91.2 was prepared.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China.
- Engineering Research Centre for Industrial Sensing and Intelligent Manufacturing Equipment of Jiangsu Province, Nanjing 210023, China.
- College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
- Nanjing Institute of Astronomical Optics & Technology, Chinese Academy of Sciences, Nanjing 210042, China.
ORCID-Profile: Tao Yang, Yongbin Zeng
Förderung
- National Natural Science Foundation of China
- Engineering Research Centre for Industrial Sensing and Intelligent Manufacturing Equipment of Jiangsu Province
- Natural Science Foundation of Jiangsu Province
- the Qing-Lan Project in Jiangsu Universitie
- China Postdoctoral Science Foundation
- Qing-Lan Project in Jiangsu Universities
Zitieren
APA
Wu, X., Wang, L., Kong, W., Yang, T., Hang, Y., & Zeng, Y. (2025). Fabrication of Large-Aspect-Ratio Micro Tool Electrodes by Bipolar Pulsed Vertical Liquid Membrane Method. Micromachines, 16(6), 636. https://doi.org/10.3390/mi16060636
Vancouver
Wu X, Wang L, Kong W, Yang T, Hang Y, Zeng Y. Fabrication of Large-Aspect-Ratio Micro Tool Electrodes by Bipolar Pulsed Vertical Liquid Membrane Method. Micromachines. 2025;16(6):636. doi:10.3390/mi16060636
BibTeX
@article{Wu2025,
author = {Wu, Xiujuan and Wang, Li and Kong, Weijing and Yang, Tao and Hang, Yusen and Zeng, Yongbin},
title = {Fabrication of Large-Aspect-Ratio Micro Tool Electrodes by Bipolar Pulsed Vertical Liquid Membrane Method},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {6},
pages = {636},
doi = {10.3390/mi16060636}
}
EUVIMED