EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 3D DC Electric Field Meter Based on Sensor Chips Packaged Using a Highly Sensitive Scheme

Pengfei Yang iD, Xiaolong Wen iD, Xiaonan Li, Zhaozhi Chu iD, Chunrong Peng, Shuang Wu

Micromachines · 20.04.2025 · 16 (4) · 484

DOI: 10.3390/mi16040484 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.04.2025. Verfasst von Pengfei Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Key Laboratory for Sensors, School of Applied Science, Beijing Information Science and Technology University, Beijing 100192, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Beijing Municipal Science and Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a 3D DC electric field meter (EFM) that uses three identical 1D MEMS chips. The shielding electrodes and sensing electrodes of the MEMS chips employ a combination of rigid frames and short strip-type beams to improve vibrational stability. To enhance sensitivity, our MEMS chips feature inner convex packaging covers. Moreover, the integrated design and wireless transmission efficiently eradicate the impact of ground potential on detection results. Detailed simulations have been conducted to analyze the electric field distribution within the chip package and the electric field distribution on the EFM’s surface. A prototype was then developed, calibrated, and validated. The test results indicate that the sensitivity of our proposed 3D EFM is at least 4.64 times higher than the highest sensitivity observed in previously reported MEMS 3D EFMs. The maximum relative deviation is a mere 2.2% for any rotation attitude. Remarkably, even in high humidity conditions, the EFM’s linearity remains within 1%. Additionally, the resolution of any single axis is less than 10 V/m.

Schlagwörter

Stichwörter der Autor:innen

3D electric field meterMEMShighly sensitive packagemoistureproof packaging structuresensor chips

Autor:innen und Institutionen

  • Beijing Key Laboratory for Sensors, School of Applied Science, Beijing Information Science and Technology University, Beijing 100192, China.
  • School of Mathematics and Physics, University of Science and Technology Beijing, Beijing 100083, China.
  • Institute of Microelectronics of Chinese Academy of Sciences, Beijing 100029, China.
  • State Key Laboratory of Transducer Technology, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China.
  • Beijing Tflying Transducer Technology Co., Ltd., Beijing 100083, China.

ORCID-Profile: Pengfei Yang, Xiaolong Wen, Zhaozhi Chu

Förderung

  • National Natural Science Foundation of China
  • Beijing Municipal Science and Technology Project

Zitieren

APA

Yang, P., Wen, X., Li, X., Chu, Z., Peng, C., & Wu, S. (2025). A 3D DC Electric Field Meter Based on Sensor Chips Packaged Using a Highly Sensitive Scheme. Micromachines, 16(4), 484. https://doi.org/10.3390/mi16040484

Vancouver

Yang P, Wen X, Li X, Chu Z, Peng C, Wu S. A 3D DC Electric Field Meter Based on Sensor Chips Packaged Using a Highly Sensitive Scheme. Micromachines. 2025;16(4):484. doi:10.3390/mi16040484

BibTeX
@article{Yang2025,
  author = {Yang, Pengfei and Wen, Xiaolong and Li, Xiaonan and Chu, Zhaozhi and Peng, Chunrong and Wu, Shuang},
  title = {A 3D DC Electric Field Meter Based on Sensor Chips Packaged Using a Highly Sensitive Scheme},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {4},
  pages = {484},
  doi = {10.3390/mi16040484}
}
Kostenlos starten →