EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Thermal Annealing on the Chemical Composition, Nanomechanical, and Nanotribological Properties of Tantalum Thin Films

Debottam Datta iD, Ali Eskandari, Junaid Syed, Himanshu Rai iD, Nitya Nand Gosvami, Ting Y Tsui iD

Micromachines · 02.04.2025 · 16 (4) · 427

DOI: 10.3390/mi16040427 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 02.04.2025. Verfasst von Debottam Datta und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science & Engineering, Indian Institute of Technology Delhi Hauz Khas, New Delhi 110016, India. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, Indian Institute of Technology Delhi - University of Waterloo Multi-Institutional Faculty Interdis-ciplinary Research Project Proposal (MFIRP Project), Waterloo Institute for Nanotechnology Interdisciplinary Research Fund Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tantalum metal and tantalum oxide thin films are commonly used in semiconductor devices, protective coatings, and biomedical implants. However, there is limited information on their nanotribological behavior and small-scale mechanical properties. This study characterized the chemical, mechanical, and tribological properties of as-deposited and 400 °C annealed β-Ta thin films using nanoindentation and atomic force microscope (AFM)-based nanoscale friction and wear tests. X-ray photoelectron spectroscopy (XPS) results revealed that a thermally grown Ta oxide layer forms on the surface of Ta film after being annealed at 400 °C. The nanoindentation data indicated an increase in both the hardness and elastic modulus in the heat-treated sample compared to the as-deposited Ta film (13.1 ± 1.3 GPa vs. 12.0 ± 1.4 GPa for hardness) and (213.1 ± 12.7 GPa vs. 175.2 ± 12.3 GPa for elastic modulus). Our nanotribological results show that the friction increased and wear resistance decreased on the surface of the annealed sample compared to the as-deposited Ta film. This discrepancy may be caused by the oxidation of Ta on the film surface, which induces residual compressive stresses in the film and degrades its wear resistance. Our results highlight the influence of thermal annealing and oxidation on nanotribological behavior and small-scale mechanical properties of Ta thin films.

Schlagwörter

Stichwörter der Autor:innen

elastic modulusfrictionhardnessnanotribologytantalumwear

Autor:innen und Institutionen

  • Department of Materials Science & Engineering, Indian Institute of Technology Delhi Hauz Khas, New Delhi 110016, India.
  • Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L 3G1, Canada.
  • Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, ON N2L 3G1, Canada.

ORCID-Profile: Debottam Datta, Himanshu Rai, Ting Y Tsui

Förderung

  • Natural Sciences and Engineering Research Council
  • Indian Institute of Technology Delhi - University of Waterloo Multi-Institutional Faculty Interdis-ciplinary Research Project Proposal (MFIRP Project)
  • Waterloo Institute for Nanotechnology Interdisciplinary Research Fund Program
  • Canadian NSERC Discovery Grant
  • Indian Institute of Technology Delhi—University of Waterloo Multi-Institutional Faculty Interdisciplinary Research Project
  • Discovery Grants

Zitieren

APA

Datta, D., Eskandari, A., Syed, J., Rai, H., Gosvami, N. N., & Tsui, T. Y. (2025). The Influence of Thermal Annealing on the Chemical Composition, Nanomechanical, and Nanotribological Properties of Tantalum Thin Films. Micromachines, 16(4), 427. https://doi.org/10.3390/mi16040427

Vancouver

Datta D, Eskandari A, Syed J, Rai H, Gosvami NN, Tsui TY. The Influence of Thermal Annealing on the Chemical Composition, Nanomechanical, and Nanotribological Properties of Tantalum Thin Films. Micromachines. 2025;16(4):427. doi:10.3390/mi16040427

BibTeX
@article{Datta2025,
  author = {Datta, Debottam and Eskandari, Ali and Syed, Junaid and Rai, Himanshu and Gosvami, Nitya Nand and Tsui, Ting Y},
  title = {The Influence of Thermal Annealing on the Chemical Composition, Nanomechanical, and Nanotribological Properties of Tantalum Thin Films},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {4},
  pages = {427},
  doi = {10.3390/mi16040427}
}
Kostenlos starten →