EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Fabrication of an Epoxy/Glass Microbeads-Based 1-3 Piezoelectric Composite

Qiyun Liu, Jinjie Zhou, Ziliang Jia, Pengfei Zhou

Micromachines · 21.03.2025 · 16 (4) · 361

DOI: 10.3390/mi16040361 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 21.03.2025. Verfasst von Qiyun Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guiding Funds of Central Government for Supporting the Development of the Local Science and Technology, National Natural Science Foundation of China (NSFC) under Grant, National Natural Science Foundation of China (NSFC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An epoxy/glass microbeads-based 1-3 piezoelectric composite is proposed, to enhance electromechanical conversion efficiency. Firstly, based on the series-parallel theory, the theoretical model is established. Secondly, the epoxy resin/glass microbeads-based 1-3 piezoelectric composite is simulated by finite element software. The effects of polymers with different acoustic impedances, the thicknesses of piezoelectric composites, and ceramic volume fractions are analyzed systematically. After parameter optimization, the epoxy/glass microbeads-based 1-3 piezoelectric composite is prepared. The experimental results agree well with the theoretical and simulation results. When the ceramic volume fraction is 60.0%, its electromechanical coupling factor is the largest, which is 0.714. Compared with the prepared traditional 1-3 piezoelectric composites with the same parameters, its electromechanical coupling factor is increased by 7.8%. Therefore, the epoxy/glass microbeads-based 1-3 piezoelectric composite can enhance the sensitivity and resolution of the transducers, which has potential advantages for improving the performance of transducers.

Schlagwörter

Stichwörter der Autor:innen

acoustic impedance of the polymerceramic volume fractionepoxy/glass microbeads-basedhigh electromechanical coupling factormodified 1-3 piezoelectric composite

Autor:innen und Institutionen

  • School of Mechanical Engineering, North University of China, Taiyuan 030051, China.
  • Shanxi Key Laboratory of Intelligent Equipment Technology in Harsh Environment, Taiyuan 030051, China.

Förderung

  • Guiding Funds of Central Government for Supporting the Development of the Local Science and Technology
  • National Natural Science Foundation of China (NSFC) under Grant
  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Liu, Q., Zhou, J., Jia, Z., & Zhou, P. (2025). Design and Fabrication of an Epoxy/Glass Microbeads-Based 1-3 Piezoelectric Composite. Micromachines, 16(4), 361. https://doi.org/10.3390/mi16040361

Vancouver

Liu Q, Zhou J, Jia Z, Zhou P. Design and Fabrication of an Epoxy/Glass Microbeads-Based 1-3 Piezoelectric Composite. Micromachines. 2025;16(4):361. doi:10.3390/mi16040361

BibTeX
@article{Liu2025,
  author = {Liu, Qiyun and Zhou, Jinjie and Jia, Ziliang and Zhou, Pengfei},
  title = {Design and Fabrication of an Epoxy/Glass Microbeads-Based 1-3 Piezoelectric Composite},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {4},
  pages = {361},
  doi = {10.3390/mi16040361}
}
Kostenlos starten →