Optimizing Tonpilz Transducer Transmission Through Impedance Matching and Head Mass Structure
Micromachines · 20.03.2025 · 16 (3) · 352
DOI: 10.3390/mi16030352 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.03.2025. Verfasst von Yang Gou und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Logistic Engineering, Shanghai Maritime University, Shanghai 201306, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Natural Science Foundation of China, The Chenguang Program of the Shanghai Education Development Foundation and the Shanghai Municipal Education Commission, Chenguang Program of the Shanghai Education Development Foundation and the Shanghai Municipal Education Commission.
Abstract (Originalsprache)
The bandwidth and output power of underwater acoustic transmitters are important for high-performance sonar detection systems. A mismatch between the impedance of the transducer and the transmitting circuit results in a low power factor, significantly limiting the sonar’s operating bandwidth and detection range. In addition, the radial head structure of the Tonpilz transducer plays an important role in determining the radiation characteristics of the sound field. This paper proposes a new radiation head structure along with an impedance-matching network circuit. First, a mathematical model of active power is established based on the Krimholtz–Leedom–Matthaei (KLM) model of the transducer. The adaptive Gauss–Newton algorithm is then used to calculate the parameters of the broadband impedance-matching network components, ultimately determining the network parameters and the structure of the transducer’s radiation head. Experimental results indicate that the transmitter voltage response of the proposed transducer is 6 dB higher than that of a conventional transducer and can be further increased by 5 dB with impedance matching. The impedance-matching network enhances the power factor of the transducer by 3.2 times, expands the frequency band by a factor of 1.6, and significantly enhances the acoustic field radiation characteristics of the underwater acoustic transducer.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Logistic Engineering, Shanghai Maritime University, Shanghai 201306, China.
- Nantong Chaolin Intelligent Technology Co., Ltd., Nantong 226010, China.
- College of Information Engineering, Shanghai Maritime University, Shanghai 201306, China.
- Chongqing Innovation Center, Beijing Institute of Technology, Chongqing 401151, China.
- School of Information and Electronics, Beijing Institute of Technology, Beijing 100081, China.
Förderung
- The National Natural Science Foundation of China
- The Chenguang Program of the Shanghai Education Development Foundation and the Shanghai Municipal Education Commission
- Chenguang Program of the Shanghai Education Development Foundation and the Shanghai Municipal Education Commission
- National Natural Science Foundation of China
Zitieren
APA
Gou, Y., Ye, S., Fu, X., Zheng, F., Zha, X., & Li, C. (2025). Optimizing Tonpilz Transducer Transmission Through Impedance Matching and Head Mass Structure. Micromachines, 16(3), 352. https://doi.org/10.3390/mi16030352
Vancouver
Gou Y, Ye S, Fu X, Zheng F, Zha X, Li C. Optimizing Tonpilz Transducer Transmission Through Impedance Matching and Head Mass Structure. Micromachines. 2025;16(3):352. doi:10.3390/mi16030352
BibTeX
@article{Gou2025,
author = {Gou, Yang and Ye, Shenhai and Fu, Xin and Zheng, Fanghua and Zha, Xuzhong and Li, Cong},
title = {Optimizing Tonpilz Transducer Transmission Through Impedance Matching and Head Mass Structure},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {3},
pages = {352},
doi = {10.3390/mi16030352}
}
EUVIMED