Design and Performance Analysis of Spiral Microchannels for Efficient Particle Separation Using Inertial Microfluidics
Micromachines · 19.03.2025 · 16 (3) · 349
DOI: 10.3390/mi16030349 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 19.03.2025. Verfasst von Eda Ozyilmaz und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Gebze Technical University, 41400 Gebze, Kocaeli, Türkiye. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Turkey, Scientific and Technological Research Council of Türkiye (TÜBİTAK).
Abstract (Originalsprache)
Accurate separation in microfluidic devices is crucial for biomedical applications; however, enhancing their performance remains challenging due to computational and experimental constraints. This study aims to optimize microfluidic devices by systematically refining spiral microchannel configurations for the segregation of circulating tumor cells (CTCs) and red blood cells (RBCs) through detailed variable analysis and resource-efficient techniques. The spiral design was developed into six variations, considering loop numbers (2, 3, and 4), aspect ratios (2.333, 3.333, and 5), spiral radii (5, 6, and 7 mm), flow rates (1.5, 2, and 3 mL/min), surface roughness levels (0, 0.5, and 1 μm), and particle sizes (12, 18, and 24 μm). Simulations were conducted in COMSOL Multiphysics and evaluated using the Taguchi method to determine the optimal configuration, reducing the analysis set from 216 to 27 through an efficient experimental design approach. The results identified the optimal structure as having an aspect ratio of 3.333, four loops, a spiral radius of 6–7 mm, a flow rate of 3 mL/min, a surface roughness of 1 μm, and a particle diameter of 24 μm. Among the evaluated parameters, aspect ratio (61.2%) had the most significant impact, followed by the number of loops (13.9%) and flow rate (9.4%). The optimized design demonstrated high separation efficiency and purity, achieving 97.5% and 97.6%, respectively. The fabrication process involved 3D-printing the channel mold, followed by polydimethylsiloxane (PDMS) casting, validating the durability and scalability of the proposed design. This study integrates simulation and experimental results, providing a robust framework for developing next-generation microfluidic devices and advancing diagnostic and targeted therapeutic applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Gebze Technical University, 41400 Gebze, Kocaeli, Türkiye.
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA.
ORCID-Profile: Eda Ozyilmaz, Gamze Gediz Ilis
Förderung
- Scientific and Technological Research Council of Turkey
- Scientific and Technological Research Council of Türkiye (TÜBİTAK)
Zitieren
APA
Ozyilmaz, E., & Gediz Ilis, G. (2025). Design and Performance Analysis of Spiral Microchannels for Efficient Particle Separation Using Inertial Microfluidics. Micromachines, 16(3), 349. https://doi.org/10.3390/mi16030349
Vancouver
Ozyilmaz E, Gediz Ilis G. Design and Performance Analysis of Spiral Microchannels for Efficient Particle Separation Using Inertial Microfluidics. Micromachines. 2025;16(3):349. doi:10.3390/mi16030349
BibTeX
@article{Ozyilmaz2025,
author = {Ozyilmaz, Eda and Gediz Ilis, Gamze},
title = {Design and Performance Analysis of Spiral Microchannels for Efficient Particle Separation Using Inertial Microfluidics},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {3},
pages = {349},
doi = {10.3390/mi16030349}
}
EUVIMED